Steel Frame Machine .pdf
Original filename: Steel Frame Machine.pdf
This PDF 1.7 document has been generated by , and has been sent on pdf-archive.com on 01/02/2018 at 08:49, from IP address 153.126.x.x.
The current document download page has been viewed 502 times.
File size: 1.8 MB (5 pages).
Privacy: public file
Download original PDF file
Steel Frame Machine
Steel Frame Machine
Thin sheets of galvanized steel can be cold formed into steel studs for use as a structural or non structural building material for both
external and partition walls in residential, commercial and industrial construction projects. There are a variety of lightweight or light
gauge steel frame roll forming machines for production of sorts of metal building materials for lightweight or light gauge steel
The most widely used lightweight or light gauge steel forming machines that can be found in the markets are like, metal stud and
track roll forming machine, roof truss roll forming machine, top roof hat purlin roll forming machine, roof and ceiling batten roll
forming machine, and furring and hat channel roll forming machine etc.
The whole steel frame roll forming machine line is including decoiler, holes punching device, roll forming machine, hydraulic power
pack, hydraulic shear, electric controller and run out table; motorized decoiler with hydraulic expansion, also coil car is optional;
Bomb type auto stacker is also available.
Steel Frame Machine
• Drywall Stud Track Roll Forming Machine
• Batten Roll Forming Machine
• Top Hat Roll Forming Machine
• Steel Frame Roll Forming Machine
Steel Frame Production
Steel Frame Buildings have been playing an important role in steel construction area for decades. From residential buildings, multiple floor residential buildings, commercial
buildings, industrial building construction, steel frame for topping up, modular houses, prefabricated houses, to solar structures, they are widely used in many different
areas, because they are thermal insulation, acoustical insulation, durability, high quality and high speed of construction on site, architectural freedom. Industry building
could create large free spans, much useful spaces for warehouses, workshops, storage are available.
Based on the steel frame design requirement, machine to produce all steel frame parts should also be made with the same speed. It is including Studs (C stud roll forming
machine), Tracks (U sections), with multiple holes punching for different installation using, such as flange holes at the bottom side, stud ribs for reinforcement, recessed
rivet hole, noggin flange removed, top and bottom plate flange removed, plate side notch and stud side notch. All above different punching should be done by several sets
of functional punching toolings. Of course, the steel frame machine could be customized built as real needs, such as only stud or track, featured holes punching tooling sets.
To reduce cost, we could build twin track steel frame machine, which is one machine rolling both studs and tracks with the separate rolling track, punching toolings could be
slide left and right side when using necessarily. All the operations are very easy and take little time to adjust. Even sometimes, we could make one machine to produce
several different sizes of studs and tracks, by changing spacers. This is not a right option for the freshman, because roller positions may be changed after this adjustment.
But it is a better option if the operator knows machine and roller tooling well enough. It is indeed saving machine cost.
The steel frame roll forming machine is very small, could be loaded into the 20 feet container. So sometimes, it could be transported to the construction site making
production on site as real quantity requirement. Very convenient and high efficiency.
We are looking forward to your cooperation!
RISHBIN WUXI CO., LTD.
Contact: Chris Ho Email: firstname.lastname@example.org Skype: tinatech_chris Tel: 86-510-85853379