Stretching the boundaries of technology .pdf
Original filename: Stretching-the-boundaries-of-technology.pdf
This PDF 1.4 document has been generated by Chromium / ConvertApi , and has been sent on pdf-archive.com on 09/03/2018 at 11:23, from IP address 182.70.x.x.
The current document download page has been viewed 103 times.
File size: 539 KB (4 pages).
Privacy: public file
Download original PDF file
CONTINUOUS DEVELOPMENT. INTELLIGENT SOLUTIONS.
Stretching the boundaries of technology
Right from the start, we have taken the best products and practices from core industrial manufacturing sectors and transformed
them into something great. Pyrok 9142 is a two-component water-based adhesive developed for bonding applications in
aerospace and mass transit interiors.
It is a Fire, Smoke and Toxicity (FST) compliant, heat reactive adhesive used for bonding fabrics, leatherette materials and
decorative laminates. The importance of re retardant products has long been the focus of the aviation industry, yet toxic smoke
is one of the biggest culprits for death. The knowledge of re retardant compliancy, reduced smoke and toxic emission, balanced
with ultra-low heat release, has always been our focus. This has been transferred into the whole Pyrok range to produce a
product that has a very high peel strength and durability, whilst still meeting all regulatory standards.
Alongside this, many major aerospace manufacturers and suppliers across the globe now require compliance to AS9100
certi cation as a condition of doing business with them. These are additional quality system requirements that satisfy DOD,
NASA, and FAA regulations. There are very few adhesive manufacturers around the world who hold this certi cate, and
Forgeway is one of them. All of our products are compliant with this elite regulation, giving our adhesives and sealants the seal of
approval from some of the biggest airlines in the world.
With the increasing demands for higher quality materials such as leather and the continuously evolving aviation standards,
Forgeway has developed a number of derivatives of Pyrok 9142 to work in combination with the latest synthetic laminated
products. Not only will it bond fabrics and laminates, it will adhere PVC, Polyurethane, rubber and much more to materials such
as aluminium, wood, GRP, Nomex type honeycomb and faced plywood.
There are many bene ts to Pyrok 9142, not only can it be re-positioned once stuck, it is a sprayable, high spec adhesive, with very
high grab and a low coat weight. It has a long open time of up to eight hours and once fully cross-linked, Pyrok 9142 has excellent
temperature and moisture resistance.
While the drying time may vary depending on ambient temperature and humidity, with porous substrates it will dry in
approximately 30-35 minutes. This can, however, be reduced with an increase of heat, but to ensure maximum bond strength is
received, we would always recommend leaving the product for up to 48 hours.
If you’d like to nd out more about the Pyrok range, visit our webpage or call 01626 367070 and ask to speak with a member of
our sales team today.
Topics: Product Focus
Subscribe to follow-up comments for this post
News Category Filter
Subscribe to our newsletter
Got a ques on? See if we've already answered it in our FAQs, we've also
provided all of our product sheets for all the informa on you should need to
know on any of our Forgeway products. If you s ll haven't found the answer to
your ques on, don't hesitate to get in touch!
> Terms of access
Emergency telephone number: +44 (0)203 394 9871 (24 hours, UK number, English)
© Forgeway 2017 | Forgeway is an ISO 9001 Accredited company | Company Registra on No. 07230689 | Vat No. GB 175 0273 17
Colle Way, Brunel Road Industrial Estate,
Newton Abbot, Devon, TQ12 4PH, UK
+44 1626 367070