2008 Kawasaki KVF360C8F 4X4 Prairie (Hardwoods) Service Repa .pdf

File information


Original filename: 2008 Kawasaki KVF360C8F 4X4 Prairie (Hardwoods) Service Repa.pdf

This PDF 1.6 document has been generated by FrameMaker 7.1 / Acrobat Distiller 6.0 (Windows), and has been sent on pdf-archive.com on 02/04/2018 at 13:52, from IP address 64.64.x.x. The current document download page has been viewed 448 times.
File size: 1.1 MB (45 pages).
Privacy: public file


Download original PDF file


2008 Kawasaki KVF360C8F 4X4 Prairie (Hardwoods) Service Repa.pdf (PDF, 1.1 MB)


Share on social networks



Link to this file download page



Document preview


MODEL APPLICATION
Year

Model

2003

KVF360-A1

2003

KVF360-C1

2004

KVF360-A2

2004

KVF360-C2

2005

KVF360-A3

2005

KVF360-C3

2006

KVF360A6

2006

KVF360C6

2007

KVF360A7

2007

KVF360C7

2008

KVF360A8

2008

KVF360C8

2009

KVF360A9

2009

KVF360C9

2010

KVF360AA

2010

KVF360CA

2011

KVF360AB

2011

KVF360CB

2012

KVF360AC

2013

KVF360AD

Beginning Frame No.
JKBVFHA1□3B500001
JKBVF360AAB600001
JKBVFHC1□3B500001
JKBVFHA1□4B529901
JKBVF360AAB602901
JKBVFHC1□4B50361
JKBVFHA1□5B539106
JKBVF360AAB604235
JKBVFHC1□5B506600
JKBVFHA1□6B552400
JKBVF360AAB604801
JKBVFHC1□6B510201
JKBVFHA1□7B561830
JKBVF360AAB606501
JKBVFHC1□7B513201
JKBVFHA1□8B571300
JKBVF360AAB606700
JKBVFHC1□8B515700
JKBVFHA1□9B579001
JKBVF360AAB609201
JKBVFHC1□9B517901
JKBVFHA1□AB582801
JKBVF360AAB609901
JKBVFHC1□AB519201
JKBVFHA1□BB584201
JKBVF360AAB610201
JKBVFHC1□BB519701
JKBVFHA1□CB587200
JKBVF360AAB610801
JKBVFHA1□DB589201
JKBVF360AAB611301

□:This digit in the frame number changes from one machine to another.

Part No.99924-1285-12

Printed in Japan

PRAIRIE 360 4×4
KVF 360 4×4

All Terrain Vehicle
Service Manual

Quick Reference Guide

This quick reference guide will assist
you in locating a desired topic or procedure.
•Bend the pages back to match the
black tab of the desired chapter number with the black tab on the edge at
each table of contents page.
•Refer to the sectional table of contents
for the exact pages to locate the specific topic required.

General Information

1 j

Periodic Maintenance

2 j

Fuel System

3 j

Engine Top End

4 j

Converter System

5 j

Recoil Starter

6 j

Engine Lubrication System

7 j

Engine Removal/Installation

8 j

Crankshaft/Transmission

9 j

Wheels/Tires

10 j

Final Drive

11 j

Brakes

12 j

Suspension

13 j

Steering

14 j

Frame

15 j

Electrical System

16 j

Appendix

17 j

PRAIRIE 360 4×4
KVF 360 4×4

All Terrain Vehicle
Service Manual
All rights reserved. No parts of this publication may be reproduced, stored in a retrieval system, or
transmitted in any form or by any means, electronic mechanical photocopying, recording or otherwise,
without the prior written permission of Quality Assurance Division/Motorcycle & Engine Company/Kawasaki
Heavy Industries, Ltd., Japan.
No liability can be accepted for any inaccuracies or omissions in this publication, although every possible
care has been taken to make it as complete and accurate as possible.
The right is reserved to make changes at any time without prior notice and without incurring an obligation
to make such changes to products manufactured previously. See your dealer for the latest information on
product improvements incorporated after this publication.
All information contained in this publication is based on the latest product information available at the time
of publication. Illustrations and photographs in this publication are intended for reference use only and may
not depict actual model component parts.

© 2002 Kawasaki Heavy Industries, Ltd.

12th Edition (0) : Mar. 12, 2012

LIST OF ABBREVIATIONS
A

ampere(s)

lb

pounds(s)

ABDC

after bottom dead center

m

meter(s)

AC

alternating current

min

minute(s)

ATDC

after top dead center

N

newton(s)

BBDC

before bottom dead center

Pa

pascal(s)

BDC

bottom dead center

PS

horsepower

BTDC

before top dead center

psi

pound(s) per square inch

°C

degree(s) Celcius

r

revolution

DC

direct current

rpm

revolution(s) per minute

F

farad(s)

TDC

top dead center

°F

degree(s) Fahrenheit

TIR

total indicator reading

ft

foot, feet

V

volt(s)

g

gram(s)

W

watt(s)

h

hour(s)



ohm(s)

L

liter(s)

EMISSION CONTROL INFORMATION
To protect the environment in which we all live, Kawasaki has incorporated crankcase emission (1), exhaust emission (2), and evaporative emission (3) control systems in compliance with
applicable regulations of the United States Environmental Protection Agency and California Air
Resources Board.
1. Crankcase Emission Control System
A sealed-type crankcase emission control system is used to eliminate blow-by gases. The blow-by
gases are led to the breather chamber through the crankcase. Then, it is led to the air cleaner. Oil is
separated from the gases while passing through the inside of the breather chamber from the crankcase,
and then returned back to the bottom of crankcase.
2. Exhaust Emission Control System
The exhaust emission control system applied to this engine family is engine modifications that consist
of a catalytic converter in the muffler (US and Canada (KVF360AA/CA ∼) models), a modified carburetor and ignition system having optimum ignition timing characteristics. The carburetor has been
calibrated to provide lean air/fuel mixture characteristics and optimum fuel economy with a suitable air
cleaner and exhaust system.
A maintenance free ignition system provides the most favorable ignition timing and helps maintain a
thorough combustion process within the engine which contributes to a reduction of exhaust pollutants
entering the atmosphere.
3. Evaporative Emission Control System
The evaporative emission control system for this vehicle consists of low permeation fuel hoses and a
fuel tank.
The Clean Air Act, which is the Federal law covering motor vehicle pollution, contains what is commonly referred to as the Act’s "tampering provisions."
"Sec. 203(a) The following acts and the causing thereof are prohibited...
(3)(A) for any person to remove or render inoperative any device or element of design installed
on or in a motor vehicle or motor vehicle engine in compliance with regulations under this
title prior to its sale and delivery to the ultimate purchaser, or for any manufacturer or dealer
knowingly to remove or render inoperative any such device or element of design after such
sale and delivery to the ultimate purchaser.
(3)(B) for any person engaged in the business of repairing, servicing, selling, leasing, or trading
motor vehicles or motor vehicle engines, or who operates a fleet of motor vehicles knowingly to remove or render inoperative any device or element of design installed on or in a
motor vehicle or motor vehicle engine in compliance with regulations under this title following its sale and delivery to the ultimate purchaser..."

NOTE

○The phrase "remove or render inoperative any device or element of design" has been generally
interpreted as follows:
1. Tampering does not include the temporary removal or rendering inoperative of devices or elements of design in order to perform maintenance.
2. Tampering could include:
a.Maladjustment of vehicle components such that the emission standards are exceeded.
b.Use of replacement parts or accessories which adversely affect the performance
or durability of the vehicle.
c.Addition of components or accessories that result in the vehicle exceeding the standards.
d.Permanently removing, disconnecting, or rendering inoperative any component or
element of design of the emission control systems.

PLEASE DO NOT TAMPER WITH NOISE CONTROL SYSTEM
(US MODEL only)
TAMPERING WITH EMISSION CONTROL SYSTEM PROHIBITED:
Federal regulations and California State law prohibit the following acts or the causing thereof:
(1) the removal or rendering inoperative by any person other than for purposes of maintenance,
repair, or replacement, of any device or element of design incorporated into any new vehicle for
the purposes of emission control prior to its sale or delivery to the ultimate purchaser or while it
is in use, or (2) the use of the vehicle after such device or element of design has been removed
or rendered inoperative by any person.






Do not tamper with the original emission related parts:
Carburetor or internal parts
Spark Plug
Magneto ignition system
Air Cleaner element

TAMPERING WITH NOISE CONTROL SYSTEM PROHIBITED:
Federal law prohibits the following acts or the causing thereof: (1) the removal or rendering
inoperative by any person other than for purposes of maintenance, repair, or replacement, of any
device or element of design incorporated into any new vehicle for the purpose of noise control
prior to its sale or delivery to the ultimate purchaser or while it is in use, or (2) the use of the
vehicle after such device or element of design has been removed or rendered inoperative by
any person.

*
*
*
*

Among those acts presumed to constitute tampering are the acts listed below:
Replacement of the original exhaust system or muffler with a component not in compliance
with Federal regulations.
Removal of the muffler(s) or any internal portion of the muffler(s).
Removal of the air box or air box cover.
Modifications to the muffler(s) or air intake system by cutting, drilling, or other means if such
modifications result in increased noise levels.

Foreword
This manual is designed primarily for use by
trained mechanics in a properly equipped shop.
However, it contains enough detail and basic information to make it useful to the owner who desires to perform his own basic maintenance and
repair work. A basic knowledge of mechanics,
the proper use of tools, and workshop procedures must be understood in order to carry out
maintenance and repair satisfactorily. Whenever the owner has insufficient experience or
doubts his ability to do the work, all adjustments, maintenance, and repair should be carried out only by qualified mechanics.
In order to perform the work efficiently and
to avoid costly mistakes, read the text, thoroughly familiarize yourself with the procedures
before starting work, and then do the work carefully in a clean area. Whenever special tools or
equipment are specified, do not use makeshift
tools or equipment. Precision measurements
can only be made if the proper instruments are
used, and the use of substitute tools may adversely affect safe operation.
For the duration of the warranty period,
we recommend that all repairs and scheduled
maintenance be performed in accordance with
this service manual. Any owner maintenance or
repair procedure not performed in accordance
with this manual may void the warranty.
To get the longest life out of your vehicle:
Follow the Periodic Maintenance Chart in the
Service Manual.
Be alert for problems and non-scheduled
maintenance.
Use proper tools and genuine Kawasaki Vehicle parts. Special tools, gauges, and testers
that are necessary when servicing Kawasaki
vehicles are introduced by the Service Manual. Genuine parts provided as spare parts
are listed in the Parts Catalog.
Follow the procedures in this manual carefully. Don’t take shortcuts.
Remember to keep complete records of maintenance and repair with dates and any new
parts installed.








How to Use This Manual
In this manual, the product is divided into
its major systems and these systems make up
the manual’s chapters. The Quick Reference

Guide shows you all of the product’s system
and assists in locating their chapters. Each
chapter in turn has its own comprehensive Table of Contents.
For example, if you want ignition coil information, use the Quick Reference Guide to locate
the Electrical System chapter. Then, use the
Table of Contents on the first page of the chapter to find the Ignition Coil section.
Whenever you see symbols, heed their instructions! Always follow safe operating and
maintenance practices.

DANGER
DANGER indicates a hazardous situation which, if not avoided, will result in
death or serious injury.

WARNING
WARNING indicates a hazardous situation which, if not avoided, could result
in death or serious injury.

NOTICE
NOTICE is used to address practices not
related to personal injury.
This manual contains four more symbols
which will help you distinguish different types
of information.

NOTE

○This note symbol indicates points of particular interest for more efficient and convenient operation.
a procedural step or work to be
• Indicates
done.

○Indicates a procedural sub-step or how to do

the work of the procedural step it follows. It
also precedes the text of a NOTE.
Indicates a conditional step or what action to
take based on the results of the test or inspection in the procedural step or sub-step it follows.
In most chapters an exploded view illustration
of the system components follows the Table of
Contents. In these illustrations you will find the
instructions indicating which parts require specified tightening torque, oil, grease or a locking
agent during assembly.

GENERAL INFORMATION 1-1

General Information
Table of Contents
Before Servicing .....................................................................................................................
Model Identification.................................................................................................................
General Specifications............................................................................................................
Unit Conversion Table ............................................................................................................

1
1-2
1-7
1-9
1-15


Related documents


2008 kawasaki kvf360c8f 4x4 prairie hardwoods service repa
www cleandpfexhaust com
maserati cpo booklet updates 3 3
ltg crate engine specifications 19328837 1
a8 3 0 wyp
audi audi tt coupe 2 0 2007 truzzz8j4710084511 partslink24

Link to this page


Permanent link

Use the permanent link to the download page to share your document on Facebook, Twitter, LinkedIn, or directly with a contact by e-Mail, Messenger, Whatsapp, Line..

Short link

Use the short link to share your document on Twitter or by text message (SMS)

HTML Code

Copy the following HTML code to share your document on a Website or Blog

QR Code

QR Code link to PDF file 2008 Kawasaki KVF360C8F 4X4 Prairie (Hardwoods) Service Repa.pdf