Original filename: toiletshelf0.pdf
This PDF 1.7 document has been generated by WPS æ–‡å— / , and has been sent on pdf-archive.com on 26/10/2018 at 01:21, from IP address 120.18.x.x.
The current document download page has been viewed 219 times.
File size: 196 KB (3 pages).
Privacy: public file
Download original PDF file
toiletshelf0.pdf (PDF, 196 KB)
Share on social networks
Link to this file download page
Step One: Step two: Step three: Take 2 upper bracket, 2 lower bracket, (note 1 take
1 bar, 2 screws, 2 gasket 1 Take 1 bar, 2 screws, 2 gasket meaning: The upper and
lower bracket does not have left and right points) 21 as shown in the figure is fixed
two lower bracket, 1 as the figure is connected to two upper bracket, install a
bracket cap, Dock two brackets, 1 mounting as shown (note when fixing the tube, |
If the figure is installed in the figure will be put on the back of the toilet on
the stand cap → Upper Tube →, the pipe step four: Step five: Step six: Take 5 bars,
10 screws, 10 pads | Take 4 feet, pieces, installation as a figure | Take 1 large
partition, 2 block small The spacer is mounted as shown in Figure 4 foot cushion
screw cover. Board, installed as pictured bulkhead Ann! Fixed a good yoga, down,
the bayonet fixed to another bar on the
Link to this page
Use the permanent link to the download page to share your document on Facebook, Twitter, LinkedIn, or directly with a contact by e-Mail, Messenger, Whatsapp, Line..
Use the short link to share your document on Twitter or by text message (SMS)
Copy the following HTML code to share your document on a Website or Blog