shaver post driver Ford distributing .pdf
Original filename: shaver-post-driver-Ford-distributing.pdf
This PDF 1.7 document has been generated by Microsoft® Word for Microsoft 365, and has been sent on pdf-archive.com on 02/07/2020 at 09:53, from IP address 103.140.x.x.
The current document download page has been viewed 26 times.
File size: 94 KB (1 page).
Privacy: public file
Download original PDF file
Shaver post driver | HD-10 hydraulic post driver | Ford Distributing
Shaver Post Drivers are designed to fit on a tractor or skid steer loader. Hydraulic power
controls the post driving process. Shaver Post Drivers are efficient and reliable, and are
used by professional fencing contractors.
Shaver post drivers are used by professional fencing contractors and farmers to install
and maintain fence lines. Drive posts quickly and efficiently using the tractor or skid
steer hydraulics. Easy mounting and operation allows the operator to drive posts quickly
and efficiently. The post driver has a tilt and offset function to drive posts vertically every
Shaver post drivers can be mounted on a tractor or skid steer loader and are powered
hydraulically. Oil from the tractor hydraulic system raises a spring loaded driving ram. At
the touch of a lever on the hydraulic valve, the oil dumps back into the tractor reservoir
and the spring loaded ram strikes the post, driving it into the ground.
The operator has complete control over the driving operation. The post is held in place
with a spring loaded safety arm, allowing the operator to stand well to the side of the
driving operation. Gentle blows start the post into the ground.
All Shaver drivers tilt and offset to make driving a vertical post easy. The tilt and offset
functions are handled mechanically with a screw crank system, or hydraulically with the
aid of cylinders. In extreme conditions, a pilot auger (4" diameter) can be mounted to
the driver. The pilot auger hole allows a post to be driven into very hard ground.
There are three models of driver to choose from. Commercial fencing operators will
want to choose either the HD-10 or HD-12 model. The HD-10 delivers 70,000 lbs of
impact and can handle posts up to 8.75" in diameter. It requires 12 gallons of flow per
minute at 1,500 psi.
Contact us to know more about our brand new products: