PDF Archive search engine
Last database update: 11 July at 20:58 - Around 220000 files indexed.
Results for «against»:
Total: 10000 results - 0.071 seconds
REPORT ON CRIMES AGAINST HUMANITY COMMITTED IN IRAN ON THE ORDERS OF MR ALI KHAMENEI – SUPREME LEADER OF THE ISLAMIC REPUBLIC OF IRAN CRIMES AGAINST HUMANITY IN IRAN January 2012 Summary FOREWARD 2 INTRODUCTION, PRESIDENTIAL ELECTION OF 12 JUNE 2009, ELECTORAL FRAUD AND REPRESSION ...
1 Steven Naismith scores against Liverpool on his debut for Norwich City and scores a perfect hat trick against Chelsea last season (2015-16) Steven Naismith 29-year-old International level English Premier League forward Norwich City FC &
To give Robinson a chance to leave the Island again, you start to teach him to improve his survival abilities against the hazards of the Island.
Nonetheless, when a deck board in such cards which doesn't work together with itself, it makes the deck weaker against totally different source of threats.
lokpal bill 96%
ISSUES WITH LOKPAL BILL Critical Issues – Prime Minister JAN LOKPAL DRAFT GOVERNMENT’S JOKE PAL Lokpal should have power to investigate allegations of corruption against P.M.
Loan against Deposits Definition of Loan against Deposits • • • • When you invest in a bank fixed deposit, you can easily get a loan against it without having to break it.
As the name suggests this is the loan given against gold.
58 The war against the kulak...............................................................................................................................................
Loan against Open Plots Loan against Open Plots Definition • A loan against property (LAP) is exactly what the name implies -- a loan given or disbursed against the mortgage of property.
Loan against Shares Definition of Loan against Shares • You can any time Leverage your investments in shares for loans to meet unforeseen expenses.
All You Need to Know about Taking Loan Against Shares Need a personal loan, but don’t want to pay the high interest charges?
When you make a ranged weapon attack roll with a blowgun against a creature that is wearing light armor or no armor and you score a critical hit, the creature is poisoned for 1 round.
The present article is an attempt to illuminate and clarify the truth about the National Socialist worldview, which was maligned and persecuted for decades by people who sought to protect the People's revolt against the power of money and the dictatorship of interest.
70th anniversary of people's victory against Nazi-fascism:
Short Notes on Design of Steel Structures Tension Member A tension member in which reversal of direct stress due to loads other then wind or earthquake forces has maximum slenderness ratio =180 A member normally acting as a tie in roof truss or bracing system. But subjected to possible reversal of stress resulting from the action of wind or earthquake forces has maximum slenderness ratio =350 Net Sectional Area s12 s22 For plate: Net area = (b x t) – nd't t 4 g1 4 g 2 Single angle connected by one leg only. o Anet A1 kA2 where, A1 = Net cross‐section of area of the connected leg. A2 = Gross cross‐sectional area of unconnected leg. (out stand) 3 A1 o k 3 A1 A2 t o A1 t1 t 2 t o A2 t2 t 2 o Anet ( I1 I 2 t )t For pair of angle placed back to back (or a signal tee) connected by only one leg of each angle (or by the flange of a tee) to the same side of a gusset plate: or it the two angles are tagged along a‐a. Anet A1 kA2 o 5 A1 k 5 A1 A2 o where, A1 = Area of connected leg A2 = Area of outstand (unconnected leg) If two angles are places back to back and connected to both sides of the gusset plate. Then o Anet A1 A2 (k 1) when tack riveted. If not tack riveted then both will be considered separately and case (ii) will be followed k 3 A1 3 A1 A2 Permissible Stress in Design The direct stress in axial tension on the effective net area should not exceeded σat where σat = 0.5fy fy = minimum yield stress of steel in MPa Lug Angle The lug angle is a short length of an angle section used at a joint to connect the outstanding leg of a member, thereby reducing the length of the joint. When lug angle is used k = 1 Compression Member Strength of an Axially Loaded Compression Member The maximum axial compressive load P P = σac x A where, o o o o P = axial compressive load (n) σac = permissible stress in axial compression (MPa) A = gross‐sectional area of the member (mm2) σac is given as ac 0.6 o f cc f y [ f ccn f yn ]1/ n fcc = elastic critical stress in compression 2E 2 o = slenderness ratio = I r Maximum Slenderness Ratio A member carrying compressive loads resulting from dead load and superimposed loads has maximum slenderness ratio = 180 A member subjected to compressive loads resulting from wind/earthquake forces provided the deformation of such members does not adversely affect the stress in any part of the structure= 250 A member normally carrying tension but subjected to reversal of stress due to wind or earthquake forces=350 Sl. No. Degree of end restraint of Recommended value of Symbol compression member effective Length 1. Effectively held in position and 0.65 L restrained against rotation at both ends 2. Effectively held in position at 0.80 L both ends restrained against rotation at one end 3. Effectively held in position at 1.00 L both ends, but not restrained against rotation 4. 5. Effectively held in position and 1.20 L restrained against rotation at one end, and at the other end restrained against rotation but not held in position. Effectively held in position and 1.50 L restrained against rotation at one end, and at the other end partially restrained against rotation 6. Effectively held in position at 2.00 L one end but not restrained against rotation, and at the other end restrained against rotation but not held in position 7. Effectively held in position and 2.00 L restrained against rotation at one end but not held in position nor restrained against rotation at the other end Built‐up Compression Member Tacking Rivets The slenderness ratio of each member between the connections should not be greater than 40 nor greater than 0.6 times the most unfavorable slenderness ratio of the whole strut The diameter of the connecting rivets should not be less than the minimum diameter given below. Thickness of member Minimum diameter of rivets UP to 10 mm 16 mm Over 10 mm to 16 mm 20 mm Over 10 mm 22 mm Lacings Type of lacing Effective length Ie Single lacing, riveted at ends Length between inner and rivets on lacing bar (= I, as shown in Fig. 17) Double lacing, riveted at ends and 0.7 times length between inner end rivets on at intersection lacing bars (= 0.7 x I) Welded lacing 0.7 times distance between inner ends of effective lengths of welds at ends (0.7 xI) For local Buckling criteria L 50 c rmin 0.7whole sec tion Where, L = distance between the centres of connections of the lattice bars to each component c rmin = minimum radius of gyration of the components of compression member For a single lacing system on two parallel faces, the force (compressive or tensile) in each bar, F For double lacing system on two parallel planes, the force (compressive or tensile) in each bar, F V 2sin V 4sin If the flat lacing bars of width b and thickness t have rivets of diameter d then, force F ac gross area b t force F at Tensile stress in each bar net area (b d ) t 2Fcos Numbers of rivets required Rivet value Compressive stress in each bar Welded connections Lap joint: Overlap (14) times thickness of bar or member, whichever is less. Butt joints: Full penetration butt weld of fillet weld on each side. Lacing bar should be placed opposite to flange or stiffening member of main member. Slab Base Area of slab base= axial load in the column permissible compressive stress in concrete The thickness of a rectangular slab base as per t 3w 2 b2 a bs 4 The thickness of a square slab base plate under a solid round column. t 10 90W B 16 bs ( B d0 ) Structural Fasteners Riveting Gross dia of rivet or dia of hole d' = d + 1.5 mm for d ≤ 25 mm d' = d + 2.0 mm for d ≤ 25 mm where d = Nominal dia of rivet d' = Gross dia of rivet or dia of hole… Unwins formula
Antimicrobial activity were studied in different solvent extracts (acetone, chloroform, ethyl acetate, hexane and methanol) by well diffusion method against human pathogenic microorganisms Bacillus subtilis, Salmonella typhi, Staphylococcus aureus, Escherichia coli, Vibrio cholera and Candida krusei.
Loan against Fixed Deposits Definition of Loan against Fixed Deposits • When you invest in a bank fixed deposit, you can easily get a loan against it without having to break it.
I have the right to remain free from these activities as they constitute harassment and stalking, and I will pursue any legal remedies available to me against you if these activities continue.
Thu, Feb 9, 2017 at 1:31 PM Forwarded message From: White House Press Office <email@example.com> Date: Thu, Feb 9, 2017 at 1:17 PM Subject: Presidential Executive Order on Preventing Violence Against Federal, State, Tribal, and Local Law Enforcement Officers To: firstname.lastname@example.org THE WHITE HOUSE Office of the Press Secretary FOR IMMEDIATE RELEASE February 9, 2017 EXECUTIVE ORDER PREVENTING VIOLENCE AGAINST FEDERAL, STATE, TRIBAL, AND LOCAL LAW ENFORCEMENT OFFICERS By the authority vested in me as President by the Constitution and the laws of the United States of America, it is hereby ordered as follows:
Thus, the only remaining claims are against the City of North Las Vegas and its employees, Michael Waller, Drew Albers, David Cawthorn, Eric Rockwell, and Travis Snyder (collectively, the NLVPD defendants).
• Iran considers itself revolutionary regime fighting against “forces of arrogance”!
Glicklich has been targeted due to his defense against the attacks on Mr.