Search


PDF Archive search engine
Last database update: 25 October at 15:41 - Around 76000 files indexed.


Show results per page

Results for «alloy»:


Total: 200 results - 0.045 seconds

Brochure 100%

Xtreme Alloys At Xtreme Alloys quality and service are paramount, Xtreme Alloys provide a highly skilled and comprehensive alloy wheel refurbishment service, which includes a unique multi step process that takes damaged wheels and returns them back to original manufactured Finish With a focus on servicing the automotive sector we have created a factory production environment that is capable of managing a High volume of wheels on a consistent basis.

https://www.pdf-archive.com/2016/06/24/brochure/

24/06/2016 www.pdf-archive.com

UHO-10-AL-CH2 94%

Nuts Frame Weldament Slide Weldament Flush Bottom Box Flush Bottom Seal Poly Seal J-Bulb Seal (option) Aluminum Alloy 6061-T6 Aluminum Alloy 6061-T6 Aluminum Alloy 6061-T6 Aluminum Alloy 6061-T6 Neoprene Rubber:

https://www.pdf-archive.com/2016/04/28/uho-10-al-ch2/

28/04/2016 www.pdf-archive.com

316 316l data sheet-Stal 92%

There is a 316LM alloy, a 2.5% minimum Mo version of Type 316L stainless steel, available only by special order.

https://www.pdf-archive.com/2018/03/16/316-316l-data-sheet-stal/

16/03/2018 www.pdf-archive.com

G N Dayananda 91%

A 286 (2), 298-311 Electric resistance variation of NiTi shape memory alloy wires in thermomechanical tests:

https://www.pdf-archive.com/2016/03/15/g-n-dayananda/

15/03/2016 www.pdf-archive.com

UHO-10-AL-CH 89%

B Aluminum Alloy 6061-T6 Stainless Steel ASTM A-276 TY.304 Or 316 Stainless Steel ASTM A-276 TY.304 Or 316 Aluminum Alloy 6061-T6 Aluminum Alloy 6061-T6 Aluminum Alloy 6061-T6 Neoprene Rubber:

https://www.pdf-archive.com/2016/04/28/uho-10-al-ch/

28/04/2016 www.pdf-archive.com

astm-a204-a204m 89%

www.steelplatecuttingpart.com ASTM A204/A204M ASTM A204/A204M Specification FOR PRESSURE VESSEL PLATES, ALLOY STEEL, MOLYBDENUM ASME SA204 is a kind of Mo-alloy steel material used to fabric high temperature pressure vessels.

https://www.pdf-archive.com/2019/05/24/astm-a204-a204m/

24/05/2019 www.pdf-archive.com

Flap-Gate 88%

Aluminum Alloy 6061-T6 Aluminum Alloy 6061-T6 Aluminum Alloy 6061-T6 Commercial Bronze Stainless Steel ASTM A-276 TY.304 Aluminum Alloy 6061-T6 Aluminum Alloy 6061-T6 Neoprene Rubber:

https://www.pdf-archive.com/2016/04/28/flap-gate/

28/04/2016 www.pdf-archive.com

20190428 Schumacher CAT L1 Setup SK-Lauf RCSF Singen 88%

g Car Weight High Alloy Wing Mount Rear Wing Gurney Height Rear Shocks ■ 22.5 mm .......................

https://www.pdf-archive.com/2019/05/02/20190428schumacher-cat-l1setup-sk-laufrcsf-singen/

02/05/2019 www.pdf-archive.com

KTM Datenblatt MacinaLycan27 D 86%

MACiNA 10-s XT XT Disc LyCAN 27  GPS+ a Macina Lycan 27.5 Alloy M:

https://www.pdf-archive.com/2014/04/10/ktm-datenblatt-macinalycan27-d/

10/04/2014 www.pdf-archive.com

2015 Trek Fuel EX5 86%

Bontrager alloy, 15mm alloy axle Rear Hub:

https://www.pdf-archive.com/2015/07/20/2015-trek-fuel-ex5/

20/07/2015 www.pdf-archive.com

astm-a203-a203m 86%

www.steelplatecuttingpart.com ASTM A203/A203M ASTM A203/A203M Standard Specification for Pressure Vessel Plates, Alloy Steel, Nickel ASME SA203 is a kind of Ni-alloy steel material used to fabric high-temperature pressure vessels.

https://www.pdf-archive.com/2019/05/24/astm-a203-a203m/

24/05/2019 www.pdf-archive.com

Square-Flap-Gate 86%

MATERIALS Body Cover Hinge Pin Roll Pin Cross Member Lift Tab Cover Seal Aluminum Alloy 6061-T6 Aluminum Alloy 6061-T6 Commercial Bronze Stainless Steel ASTM A-276 TY.304 Aluminum Alloy 6061-T6 Aluminum Alloy 6061-T6 Neoprene Rubber ASTM:

https://www.pdf-archive.com/2016/04/28/square-flap-gate/

28/04/2016 www.pdf-archive.com

astm-a633-a633m 86%

www.steelplatecuttingpart.com ASTM A633/A633M Standard Specification for Normalized High-Strength Low-Alloy Structural Steel Plates ASTM A633/A633M Standard Specification for Normalized High-Strength Low-Alloy Structural Steel Plates.

https://www.pdf-archive.com/2019/05/24/astm-a633-a633m/

24/05/2019 www.pdf-archive.com

20170726-Santa Fe Spec Sheet 85%

tyres Wheel type Wheel dimensions Tyre dimensions Spare wheel type Driving convenience Hyundai Santa Fe Active Active X Elite Highlander SR Alloy Alloy Alloy Alloy Alloy 17 x 7.0J +47 19 x 7.5J +49 18 x 7.5J +49 19 x 7.5J +49 19 x 7.5J +49 235/55 R19 101V (Michelin 235/65 R17 104H 235/55 R19 101H 235/60 R18 103H 235/55 R19 101H Latitude Tour HP) Full size alloy Full size alloy Full size alloy Full size alloy Full size alloy Passive safety Active Active X Elite Highlander SR Doors Impact sensing auto door unlock • • • • • Rear door child safety locks • • • • • Seatbelts Pretensioners, load limiters &

https://www.pdf-archive.com/2017/09/05/20170726-santa-fe-spec-sheet/

05/09/2017 www.pdf-archive.com

LSAW Steel Pipe Mic Line Pipes 84%

MiC is dedicated to the development and manufacture of high temperature alloy pipe, low temperature alloy pipe and high strength structural welded pipe.

https://www.pdf-archive.com/2017/07/25/lsaw-steel-pipe-mic-line-pipes/

25/07/2017 www.pdf-archive.com

Inconel 718 TiG Welding 83%

in Metallurgical and Materials Engineering By Hariram M (112113016) Deep Theerath M (112113024) Arivarasu P (112113035) Sanjay G (112113046) DEPARTMENT OF METALLURGICAL AND MATERIALS ENGINEERING NATIONAL INSTITUTE OF TECHNOLOGY TIRUCHIRAPPALLI-620015 MAY 2017 ABSTRACT Inconel 718 is the nickel based high strength super alloy suitable for service at temperature from (-252ºC) to (700ºC).

https://www.pdf-archive.com/2017/09/08/inconel-718-tig-welding/

08/09/2017 www.pdf-archive.com

XR TRIM INFO 83%

alloy wheel (rated 1-tonne) - 215/60 R16 C 1-tonne tyre 16"

https://www.pdf-archive.com/2018/04/19/xr-trim-info/

19/04/2018 www.pdf-archive.com

ST CKBA standards in English 83%

Heat treatment of parts, blanks and welded assemblies made of high-alloy steels, corrosion resistant and heat-resistant alloys https://gostperevod.com/st-ckba-016-2005.html ST CKBA 017-2005 in English - Pipeline fittings.

https://www.pdf-archive.com/2018/06/14/st-ckba-standards-in-english/

14/06/2018 www.pdf-archive.com

CRA 2550E Data Sheet 82%

CRA 2550E NOMINAL COMPOSITION Chromium 25% Nickel 50% Molybdenum 6% Tungsten 1.5% Iron Balance CRA 2550E (UNS N06255) is a cold worked nickel-based alloy meeting the severe challenges of wells containing high chlorides, H2S and temperature.

https://www.pdf-archive.com/2016/04/11/cra-2550e-data-sheet/

11/04/2016 www.pdf-archive.com

CT-3076-HGA Anti-Drone UAV Outdoor Jammer High Gain Antennas 82%

1 year HIGHER GAIN DIRECTIONAL ANTENNA THREE BANDS IN ONE ANTENNA ELECTRICAL SPECIFICATIONS Frequency Range------------------------- 1570-1620MHz/2400-2500MHz/5100-5900MHz Impedance---------------------------------- 50 Ohm VSWR---------------------------------------- ≤1.5 Gain------------------------------------------- 14dBi (1570-1620MHz):16 dBi (2400-2500MHz) 18 dBi (5100-5900MHz) Front to Back Ratio----------------------- >24dB Polarization--------------------------------- ±45° Horizontal 3dB Beam Width------------ (1570-1620):90° (2400-2500):90° (5100-5900):90° Vertical 3dB Beam Width--------------- (1570-1620):15° (2400-2500):15° (515900-00):15° Maximum Input Power------------------- 200W Lighting Protection------------------------ Direct Ground Connector Place--------------------------- Bottom Connector----------------------------------- N-Female MECHANICAL SPECIFICATIONS Dimensions(L/W/D)------------------------- 745*180*80mm Weight------------------------------------------ 4.0 kg Three Bands in One Antennas Rated Wind Velocity------------------------ 60m/s Total 2 x Antennas Operating Temperature-------------------- -40℃-60℃ 6 Band CT-3076-O-HGA Mounting Hardware------------------------- Ø50-Ø75mm Radiating Element Material--------------- Zinc Alloy、Aluminum Alloy Reflector Material--------------------------- Aluminum Alloy Radome Material---------------------------- PVC Radome Color-------------------------------- Gray

https://www.pdf-archive.com/2016/08/10/ct-3076-hga-anti-drone-uav-outdoor-jammer-high-gain-antennas/

10/08/2016 www.pdf-archive.com

CT-3077-HGA 7 Bands Drone UAV Outdoor Jammer 82%

1 year HIGHER GAIN DIRECTIONAL ANTENNA THREE BANDS IN ONE ANTENNA ELECTRICAL SPECIFICATIONS Frequency Range------------------------- 1570-1620MHz/2400-2500MHz/5100-5900MHz Impedance---------------------------------- 50 Ohm VSWR---------------------------------------- ≤1.5 Gain------------------------------------------- 14dBi (1570-1620MHz):16 dBi (2400-2500MHz) 18 dBi (5100-5900MHz) Front to Back Ratio----------------------- >24dB Polarization--------------------------------- ±45° Horizontal 3dB Beam Width------------ (1570-1620):90° (2400-2500):90° (5100-5900):90° Vertical 3dB Beam Width--------------- (1570-1620):15° (2400-2500):15° (515900-00):15° Maximum Input Power------------------Lightning Protection------------------------ 200W Direct Ground Connector Place--------------------------- Bottom Connector----------------------------------- N-Female MECHANICAL SPECIFICATIONS Dimensions(L/W/D)------------------------- 745*180*80mm Weight------------------------------------------ 4.0 kg Three Bands in One Antenna Rated Wind Velocity------------------------ 60m/s Total 2 x Antennas Operating Temperature-------------------- -40℃-60℃ 6 Band CT-3076-HGA Mounting Hardware------------------------- Ø50-Ø75mm Radiating Element Material--------------- Zinc Alloy、Aluminum Alloy Reflector Material--------------------------- Aluminum Alloy Radome Material---------------------------- PVC Radome Color-------------------------------- Gray

https://www.pdf-archive.com/2017/03/05/ct-3077-hga-7-bands-drone-uav-outdoor-jammer/

05/03/2017 www.pdf-archive.com

3076B-HGA Bulit-in Battery Anti-Drone UAV Pelican Jammer 82%

1 year HIGHER GAIN DIRECTIONAL ANTENNA THREE BANDS IN ONE ANTENNA ELECTRICAL SPECIFICATIONS Frequency Range------------------------- 1570-1620MHz/2400-2500MHz/5100-5900MHz Impedance---------------------------------- 50 Ohm VSWR---------------------------------------- ≤1.5 Gain------------------------------------------- 14dBi (1570-1620MHz):16 dBi (2400-2500MHz) 18 dBi (5100-5900MHz) Front to Back Ratio----------------------- >24dB Polarization--------------------------------- ±45° Horizontal 3dB Beam Width------------ (1570-1620):90° (2400-2500):90° (5100-5900):90° Vertical 3dB Beam Width--------------- (1570-1620):15° (2400-2500):15° (515900-00):15° Maximum Input Power------------------- 200W Lighting Protection------------------------ Direct Ground Connector Place--------------------------- Bottom Connector----------------------------------- N-Female MECHANICAL SPECIFICATIONS Dimensions(L/W/D)------------------------- 745*180*80mm Weight------------------------------------------ 4.0 kg Three Bands in One Antennas Rated Wind Velocity------------------------ 60m/s Total 2 x Antennas Operating Temperature-------------------- -40℃-60℃ 6 Band CT-3076B-HGA Mounting Hardware------------------------- Ø50-Ø75mm Radiating Element Material--------------- Zinc Alloy、Aluminum Alloy Reflector Material--------------------------- Aluminum Alloy Radome Material---------------------------- PVC Radome Color-------------------------------- Gray 2 x 6 Band CT-3076B-HGA Total 4 x Directional Antennas Cover 360 Degree

https://www.pdf-archive.com/2016/08/10/3076b-hga-bulit-in-battery-anti-drone-uav-pelican-jammer/

10/08/2016 www.pdf-archive.com

report on chemical weapon use Dr Abbas 81%

This Tungsten alloy bombs consist of micro shrapnel 1-2 mm of heavy metals as cobalt.

https://www.pdf-archive.com/2019/11/01/report-on-chemical-weapon-usedr-abbas/

01/11/2019 www.pdf-archive.com