Search


PDF Archive search engine
Last database update: 22 October at 03:49 - Around 76000 files indexed.


Show results per page

Results for «anglehead»:


Total: 1 results - 0.006 seconds

IRITS-0516-053-Pneumatic Assembly Tools For General Industry 100%

055 150 S06 = 3/8” Square D = PFCS 35 = 35 mm Head M = Numeric LED 008 035 150 315 B = Transfer Key S08 = 1/2” Square Motor 1 = 115 VAC US W = Wall Mount S = Small Anglehead A = 8 I/O 08 = 850 C =200 Cushion A = Angle 1M = 1= Spindle = 1/2” Square M =S08 Plus 43 = 43 mmLHead 012 050 190 435 = 3/4”Mount Square Z = Offset 2 = 220 CS12 = Cabinet = Large Anglehead B = 24 I/O 10 = 1000 Clutch VAC US 225 S12 = 3/4” Square 48 = 50 mm Head 016 055 220 450 S16 = 1” Square X = High Torque 12A==Inline 1270 = Stall W = Wall Mount 8 I/ODInline 3 = 230 VAC European 1 = 1 Spindle 1 = 115 VAC US Inline 1 = Serial, Ethernet 56 = 60 mm Head 020 090 520 62 = 150 mm Spindle, 50 mm float 15B==1500 C == 1/4” Cabinet Mount 24 I/O 040 2 P= =220 VACtoUS 1 Quick Change 012 025 Push Start 1 = Reversible 3 = PROFIBUS, Serial, Ethernet 650 92 = 225 mm Spindle, 50 mm float Inline 3 S= =230 VAC European S = Single 3 = 1/4” Bit Finder 01517 = 1750 030 1 = Serial, 055 Ethernet Trigger T = Top 4 = DeviceNet, Serial, Ethernet 01K = 1000 22 = 300 mm Spindle, 50 mm float 20 25 mm Spindle, no float Transducer 4 ==Serial, 1/4” Square 02020 = 2000 040 3 = PROFIBUS, 070 L = Lever Blank = Bottom 5 = Interbus-S, Serial, Ethernet Ethernet 15C = 1500 28 = 2800 21 50 mm Spindle, 19 mm float 6 ==Serial, 3/8” Square 027 055 4 = DeviceNet, 090 T = Trigger/ 6 = EtherNet/IP, Modbus-TCP, Serial, Ethernet Ethernet 18C = 1750 41 = 100 mm Spindle, 19 mm float L = Light 9 = 1/4” Hex Detent 046 115 Lever + Push 5 = Interbus-S, Serial, Ethernet 20C = 2000 61 = 150 mm Spindle, 38 mm float H = Heavy 150 6 = EtherNet/IP, Modbus-TCP, Serial, Ethernet 22C = 2200 81 = 200 mm Spindle, 38 mm float S = Solid 180 25C = 2500 Series S06 = 3/8” Square S08 = 1/2” Square S12 = 3/4” Square QM S16 = 1” Square 2 = 150 mm Spindle, 50 mm float 2 = 225 mm Spindle, 50 mm float 2 = 300 mm Spindle, 50 mm float R B N S A A G L R Q S Model Identification Guide 1 Series Air Screwdrivers / Nutrunners Fixtured Fastening 1 R AHandles N () QMMH C 1 B T D A T = Trigger Blank = No Trigger D = Detent Blank = No Slide 20 &

https://www.pdf-archive.com/2017/03/24/irits-0516-053-pneumatic-assembly-tools-for-general-industry/

24/03/2017 www.pdf-archive.com