Search


PDF Archive search engine
Last database update: 26 November at 06:13 - Around 76000 files indexed.


Show results per page

Results for «bought»:


Total: 600 results - 0.051 seconds

A-Z OF MINI IMPORTATION BIZ 100%

www.facebook.com/taiwopublishing 8 INTRODUCTION My unreserved appreciation goes to every individual that bought this guide directly from me.

https://www.pdf-archive.com/2015/02/08/a-z-of-mini-importation-biz/

08/02/2015 www.pdf-archive.com

Used Flash 99%

(Order # 028-8404682-5470713) Image 3) This is the first flash that was bought.

https://www.pdf-archive.com/2015/11/30/used-flash/

30/11/2015 www.pdf-archive.com

LienLotus Portfolio 2017 (1) 98%

Bought it because I needed to win back my ex-boyfriend.

https://www.pdf-archive.com/2017/05/16/lienlotus-portfolio-2017-1/

16/05/2017 www.pdf-archive.com

Alphabay Investigation Techniques 96%

● ● ● ● ● ● ● Was​ ​monitored​ ​by​ ​UK​ ​intelligence​ ​agency​ ​as​ ​part​ ​of​ ​Alphabay​ ​investigation Entrapped​ ​by​ ​said​ ​agency,​ ​who​ ​presumably​ ​thought​ ​I​ ​was​ ​more​ ​than​ ​just​ ​someone​ ​who bought​ ​diazepam​ ​+​ ​cannabis​ ​for​ ​personal​ ​use​ ​on​ ​occasion Extensive​ ​human​ ​rights​ ​violations​ ​during​ ​their​ ​investigation​ ​(repeated​ ​threats​ ​at​ ​my​ ​life, and​ ​those​ ​I​ ​care​ ​about;​ ​torture;​ ​no​ ​trial​ ​of​ ​any​ ​form...) Pharmaceutically​ ​&​ ​Psychologically​ ​Tortured​ ​during​ ​a​ ​hospital​ ​visit​ ​(can​ ​speak​ ​to specifics) Now​ ​trying​ ​to​ ​force​ ​psychiatry​ ​upon​ ​me,​ ​plus​ ​“silence”​ ​me​ ​&​ ​others​ ​who​ ​know​ ​specifics Food,​ ​drink,​ ​medication​ ​poisoned​ ​in​ ​attempt​ ​to​ ​silence​ ​me.​ ​So​ ​far​ ​avoided​ ​fatal​ ​harm,​ ​not sure​ ​on​ ​impact​ ​on​ ​overall​ ​health​ ​however.

https://www.pdf-archive.com/2017/09/16/alphabay-investigation-techniques/

16/09/2017 www.pdf-archive.com

Technical Document Real Deal (23) 95%

To save time, we bought all of the thrusters waterproofed.

https://www.pdf-archive.com/2018/04/19/technical-document-real-deal-23/

19/04/2018 www.pdf-archive.com

Poe-O'Neal-Hart 92%

Times — nothing in either — a few words of no account in the Chronicle [Eddy] bought two or three newspapers, none of which contained anything worth reading, he said.

https://www.pdf-archive.com/2012/01/09/poe-o-neal-hart/

09/01/2012 www.pdf-archive.com

Stuff, 5 pp, docs, tools 90%

to LOOK LOOKED LOOKED- mirar, parecer to BUY BOUGHT BOUGHT –comprar Irregular verbs:

https://www.pdf-archive.com/2017/06/30/stuff-5-pp-docs-tools/

30/06/2017 www.pdf-archive.com

ilovepdf ppa esl 2, first term, 170617, 26 pp 89%

llevar broadcast broadcast broadcast- emitir señales de sonido buy bought bought- comprar catch caught caught- coger, atrapar choose chose chosen- elegir come came come- venir cost cost cost- costar cut cut cut- cortar ** do did done- hacer draw drew drawn- dibujar dream dreamt/dreamed dreamt/dreamed- soñar drink drank drunk- beber drive drove driven- conducir eat ate eaten- comer feel felt felt- sentir forbid forbade forbidden- prohibir forecast forecast forecast- prever, predecir forget forgot forgotten- olvidar ** give gave given- dar have had had- tener, haber know knew known-saber, conocer mean meant meant- significar, querer decir meet met met- encontrarse;

https://www.pdf-archive.com/2017/06/22/ilovepdf-ppa-esl-2-first-term-170617-26-pp/

22/06/2017 www.pdf-archive.com

ilovepdf esl 1, ppa, first term, 170617, 28pp 87%

emitir buy bought bought: comprar catch caught caught:

https://www.pdf-archive.com/2017/06/23/ilovepdf-esl-1-ppa-first-term-170617-28pp/

23/06/2017 www.pdf-archive.com

Dave F W-Pictures 87%

I bought my current RD in July, ’79 and have had it off and on ever since.

https://www.pdf-archive.com/2015/04/24/dave-f-w-pictures/

24/04/2015 www.pdf-archive.com

ege-tn likexin 85%

M y friend bought an incomplete motorbike, and he lacked some tires.

https://www.pdf-archive.com/2017/01/08/ege-tn-likexin/

08/01/2017 www.pdf-archive.com

UK citizens may soon need 85%

The UK government is holding a consultation into when this change should enter into force: after a six­month, three­year, or five­year transitional period. An article in The Bookseller puts the starting TORCHES AND PITCHFORKS North Carolina citizenry defeat pernicious Big Solar plan to suck up the Sun How Fargo’s midwestern UFOs became pop culture’s “realest” alien depiction Bad reviews for Taser documentary on Amazon, iTunes seem to come from http://arstechnica.com/tech­policy/2015/12/you­may­soon­need­a­licence­to­take­photos­of­that­classic­designer­chair­you­bought/ 1/3 12/13/2015 UK citizens may soon need licenses to photograph some stuff they already own | Ars Technica date as October 2016 without citing a source. In any case, the change is definitely coming, and it'll likely be quite soon.

https://www.pdf-archive.com/2015/12/14/uk-citizens-may-soon-need/

14/12/2015 www.pdf-archive.com

LasVegasRoadmap 83%

at the start people immediately bought to ’win’ phase 1.

https://www.pdf-archive.com/2018/03/21/lasvegasroadmap/

20/03/2018 www.pdf-archive.com

document (1) 82%

I was thinking This morning about how you cut Your finger teaching yourself Ikebana Now out in the half rain half light What there is no good word for I bought a cookie and A purple Prius hit me The cookie fell and I started crying Yesterday I walked along the curving Flood walls with the cold guardrails I went to the gay thrift store and Every electronic Kind of looked like a toaster I can feel this poem taking a turn It’s starting to be about you Tack that debt to my dowry But imagining you bending the flowers How when you told me about that I Sent you photos of my wild arrangements Thistles billy bobs ranunculus St.

https://www.pdf-archive.com/2015/01/28/document-1/

28/01/2015 www.pdf-archive.com

making 82%

Bench Drills Probably the most commonly used method for new pipemakers a good bench drill combined with a cross axis vice makes the job of drilling much easier and accurate, this was the first power tool I bought just for pipemaking.

https://www.pdf-archive.com/2010/11/27/making/

26/11/2010 www.pdf-archive.com

High Sierra Showerheads in tiny & net zero homes-Oct 2016 81%

● ● ● ● In 2015, Yale University bought 800 of High Sierra’s showerheads, to be used by its world-class student body.

https://www.pdf-archive.com/2017/01/17/high-sierra-showerheads-in-tiny-net-zero-homes-oct-2016/

17/01/2017 www.pdf-archive.com

You will always have reasons to thank God fo1 81%

why she was crying, something Brenda you must realize that she quickly denied yet when I your life is worth much more later insisted, she opened up and than the phone”, I replied amidst sobs, narrated to me the “But Lazarus, I bought my excruciating ordeal of how two phone expensively” she armed men had attacked her and insisted.

https://www.pdf-archive.com/2017/04/17/you-will-always-have-reasons-to-thank-god-fo1/

17/04/2017 www.pdf-archive.com

Max Edelsen1 80%

________________________ ________________________ ________________________ Description Recently he's bought some land with his retirement money, and is ________________________________________________ Currently in the process of building a home for himself.

https://www.pdf-archive.com/2017/02/13/max-edelsen1/

13/02/2017 www.pdf-archive.com

grinder 80%

HERE'S THE GRINDER    Well after all of the thinking and talking about it, here is the grinder that I built. It is very  similar to the one that Rob Frink has on his site, but with some modifications.  I am trying to draw up some plans for it and will share them with anyone who would like  to have them once I get them done.  I traded a knife to a friend who has a small machine shop for the aluminum bar and plate.  I did all of the cutting, drilling and tapping myself.  I bought the contact wheel and shaft and the idler from Rob Frink at Beaumont Metal  Works. The rest I did myself.  I really haven't totaled the cost yet, but I have less than $700 in it including the motor.    Here is the right side of the grinder                        Another from the right rear    Here is a pic of the tracking adjustment                      Here is the 2hp Leeson dc and matching control that I bought on an eBay auction    Here is the left side        I'll try to get some more detailed pics if anyone wants to see something specific. The  batteries died in the camera as I was taking these so they are all I have for now.  Let me know what you think.  Mike  Ps: You will have to overlook the mess, I didn't take time to straighten anything up before  taking the pics and still have to mount the control box for the motor and wire it up  correctly.     -----------------------------------------     Baltes189  Guest    Registered: Not Yet  Location:   Posts: N/A   Grinder Wheels     Did you make the wheels on your grinder? If so How did you do it, I am very curious  about making some for a future grinder because I don't want to shell out 28 bucks a  wheel, or what ever the price is, Although if I could find some really cheap fairly good  wheels I could go that route.     -----------------------------------------    Mike Conner  Guest    Registered: Not Yet  Location:   Posts: N/A   Re: Grinder Wheels     I made the drive wheel and am making the 2" wheels for the flat platen and will make the  small wheel attachment. I have a small lathe. You can see part of it in the background in a  couple of the pics. I am making them just because I want to, but by the time you buy the  bearings and the 2" aluminum bar stock, it wouldn't be that much more to just buy the  wheels from Rob Frink. He does first class work, and you will get more than you pay for  when you buy from him.  Mike     -----------------------------------------     KandSKNIVES  Guest    Registered: Not Yet  Location:   Posts: N/A   Re: Grinder Wheels     Mike, considering the cost of the motor and control, you really saved yourself some big  bucks. In fact, you could say you are way ahead. Can your strut be shortened up enough  to use 2/48 belts?     -----------------------------------------     Mike Conner  Guest    Registered: Not Yet  Location:   Posts: N/A   Re: Grinder Wheels     Ken,  I really don't know, but I can check and see. If not a person could change the layout some  to accommodate the shorter belts, but there is such a better selection of 2X72 belts on the  market. I built this one out of my head and by looking at pictures of other machines, I  wanted the idler to be higher and set back a little farther from the contact wheel than most  that I looked at. I do a lot of slack belt work on the handles as well as use the slack belt to  sharpen the knives so I set this one up with that in mind. I do have some 1x72 belts that I  have tried on this machine and they work fine as well.  I am making up some rough plans and will be happy to send them to anyone who is  interested when I finish them.  Mike     -----------------------------------------    KandSKNIVES  Guest    Registered: Not Yet  Location:   Posts: N/A   Re: Grinder Wheels     Thanks Mike for the info, and yes I would definitely like some plans. You have built the  almost same machine I had in my mind to start to build. I already have a big supply of  2/48 belts, got cheap, that is why I asked. Also, could you post more pics of your  alignment control setup? Thanks for your time and effort.     -----------------------------------------    Mike Conner  Guest    Registered: Not Yet  Location:   Posts: N/A   Re: Very Nice     I have had several emails asking me to post some more pictures of the tracking  mechanism so here they are. Hope this helps.           

https://www.pdf-archive.com/2015/06/03/grinder/

03/06/2015 www.pdf-archive.com

test 79%

Six years ago I bought a Porsche Cayman, my fifth Porsche but my first (and probably last) new one.

https://www.pdf-archive.com/2013/05/28/test/

28/05/2013 www.pdf-archive.com

Untitled 1 79%

I thought, as the alarm clock my mother bought me started blaring its usual sound.

https://www.pdf-archive.com/2014/04/09/untitled-1/

09/04/2014 www.pdf-archive.com

5 Ways to Prevent a Hangover 79%

(Last New Years I gave out a bunch of anti-hangover patches I bought on the internet to my friends as a test.

https://www.pdf-archive.com/2016/03/22/5-ways-to-prevent-a-hangover/

22/03/2016 www.pdf-archive.com

RollPlay Swan Song - Week 1 Part 2 78%

So, from Majid-, Majid obviously, as we’ve established, is a place where a very wealthy individual just bought up all of the resources and the ability to mine there, and so I grew up on this home planet poor as fuck, while everyone else was wealthy around her and her family.

https://www.pdf-archive.com/2017/01/31/rollplay-swan-song-week-1-part-2/

31/01/2017 www.pdf-archive.com

supplementary 76%

For example, when comparing the event mentions ‘खरीदा (bought)’ and ‘अ ध हण (acquired)’, extracted from the sentences ‘[नोमरा (Nomura)]Arg0 [ली न दस (Lehman Brothers)]Arg1 को खरीदा (bought)’ and ‘[नोमरा (Nomura)]Arg0 [ली न दस (Lehman Brothers)]Arg1 का अ ध हण कया (acquired)’, these set of features compute similarities between both ‘नोमरा’ mentions and both ‘ली न दस’ mentions.

https://www.pdf-archive.com/2015/02/12/supplementary/

12/02/2015 www.pdf-archive.com

w E 18830400 76%

W E ANSWER FOR THEM It will be remembered, that in discussing the erroneous teachings of two contemporaries— “ Zion’s Day Star” and “ The World’s Hope”— we called attention to the fact that they used the scriptural terms '‘Itansom,’’ “ Redeem,” “ Bought with a Price,” etc., dishonestly.

https://www.pdf-archive.com/2017/08/04/w-e-18830400/

04/08/2017 www.pdf-archive.com