PDF Archive search engine
Last database update: 11 May at 09:05 - Around 76000 files indexed.
A procedure is proposed, based on the creation of a numerical 2D thermal model which is calibrated against experimental data from several temperature and heat flux sensors which are located at specific points in the thermal bridge elements.
Do not turn the engine on as it will not run properly until the TPS has been calibrated.
Output voltage during closed throttle event is lower than when it was calibrated Solution:
12 hours old, value received 125 125* à is calibrating, value received 125 125+ à is calibrating second stage, value received 125 NC à not calibrated DB?
The operator must manually load a master part with calibrated dimension into the fixture.