PDF Archive: PDF Search

Target achieved 100%

https://www.pdf-archive.com/2013/10/06/target-achieved/

06/10/2013 www.pdf-archive.com

Target achieved 99%

https://www.pdf-archive.com/2016/02/04/target-achieved/

04/02/2016 www.pdf-archive.com

Prisons 99%

https://www.pdf-archive.com/2017/11/20/prisons/

20/11/2017 www.pdf-archive.com

Answer Key 98%

Answer Key CGL 2016 GK Average Marks in :

https://www.pdf-archive.com/2016/08/18/answer-key/

18/08/2016 www.pdf-archive.com

Unit 4 - January 2011 MS 98%

https://www.pdf-archive.com/2011/06/24/unit-4-january-2011-ms/

24/06/2011 www.pdf-archive.com

June 2010 MS.PDF 97%

https://www.pdf-archive.com/2011/06/25/june-2010-ms/

25/06/2011 www.pdf-archive.com

sigir12-spelling 97%

https://www.pdf-archive.com/2015/12/01/sigir12-spelling/

01/12/2015 www.pdf-archive.com

January 2010 MS 97%

ecf/TE/cq (error carried forward) means that a wrong answer given in an earlier part of a question is used correctly in answer to a later part of the same question.

https://www.pdf-archive.com/2011/06/25/january-2010-ms/

25/06/2011 www.pdf-archive.com

7100 s10 er 97%

Candidates found the following questions relatively easy and all candidates answered them correctly – Questions 4 and 7.

https://www.pdf-archive.com/2016/06/13/7100-s10-er/

13/06/2016 www.pdf-archive.com

Teachers’ version GCE O LEVEL – May/June 2011 Syllabus 5090 (a) (i) A 4.5–4.6 cm B 4.9–5.0 cm C 5.3–5.4 cm 3 correct with correct units at least once 3 correct with no units or 2 correct with correct units once (ii) answers related to measurements in (a)(i) 3 correct with appropriate –/loss or +/gain 3 correct with no -/loss or +/gain or 2 correct with -/loss and +/gain 2 marks 1 mark [2] 2 marks 1 mark [2] (iii) all changes described correctly in terms of increase, decrease or no change;

https://www.pdf-archive.com/2016/06/09/5090-s11-ms-61/

09/06/2016 www.pdf-archive.com

4024 s14 ms 22 96%

Page 2 Mark Scheme GCE O LEVEL – May/June 2014 Question 1 Mark Paper 22 Part marks (a) 138 to 140 1 (b) D marked at intersection of correct arcs 2 B1 for a correctly positioned D with one correct construction arc or no correct arcs Or, provided D to the west of AB B1 for D on one correct arc or radii 5 cm and 6 cm reversed with arcs Or, provided D to the east of AB B1 for D on intersection of two correct construction arcs (c) 103° 1 Tolerance ± 2° (d) (i) P and Q marked at intersection of perpendicular bisector and circle 3 B1 for perpendicular bisector of AC minimum 3 cm long B1 for arcs radius 4.5 cm centre B, minimum 3 cm long cumulatively B1 for P and Q at correct positions 249° 1 Tolerance ± 2° 97 1 (ii) 2 Answers Syllabus 4024 (a) (i) (ii) (c = ± ) 4f +d 6 2 M1 for 4f = 6c2 – d or better (b) x ≥ 2 cao 2 B1 for final answer {+ or –} x * {+ or –} 2, where * can be wrong inequality or equals (c) (3 + 5x)(3 – 5x) oe 1 Must be integers (d) (8p – 3q)(x – 2y) oe seen isw 2 M1 for x(8p – 3q) oe or – 2y(8p – 3q) oe Or 8p(x – 2y) oe or – 3q(x – 2y) oe © Cambridge International Examinations 2014 Page 3 Mark Scheme GCE O LEVEL – May/June 2014 Question Answers 1.12 and –2.32 final answer (e) Syllabus 4024 Mark 4 Paper 22 Part marks B3 for one correct solution or x = 1.1 to 1.121 and -2.321 to -2.3 p ± (or + or −) q r B1 for p = –6 and r = 10 If in the form And B1 for q = 296 or 3 533.9(0) to 534 2 M1 for 32 × 5.20 + 0.15 × 2450 (ii) 1760 3 M1 for 409.6 – 28 × 5.20 [= 264] M1 for ‘their 264’ ÷ 0.15 (b) (i) 3.75 2 SC1 for an answer of 28.75, 28.7, 28.8, 15, 3.7, 3.8 or 0.0375 402.5[0] or 403 or 402 2 M1 for (a) (i) 1 3 1 (ii) 2 3 1 25 numbers completed correctly 1 (a) (i) (ii) 4 (b) (i) (ii) 5 q = 17.2...

https://www.pdf-archive.com/2016/06/11/4024-s14-ms-22/

11/06/2016 www.pdf-archive.com

7048 w08 ms 1 96%

Page 2 1 (a) (i) (ii) (b) (c) (d) Mark Scheme GCE O LEVEL – October/November 2008 Mark to overlay Ignore the position of side view Base width (100 mm) Roof width (80 mm) Apex in centre (any height) Height to ‘overhang’ (70 mm from bottom) Height to roofline (75 mm from bottom) Height to apex (100 mm from bottom) Leg width at base – 7 mm across (1 × 2) Leg width at top – 14 mm across at roofline (1 × 2) Syllabus 7048 Paper 01 1 1 1 1 1 1 2 2 [10] Mark to overlay Ignore position of plan Award marks if correctly projected from incorrect side view Square for roof (80 mm square or to candidate side view) Cross (to overlay or candidate solution) ‘Overhang’ parallel to square (to overlay or candidate solution) Four legs shown (to overlay or candidate solution) Best leg – square base (1) and two tapered sides (1) (to overlay or candidate solution) 2 [6] 80 mm base Isosceles triangle (any size) Triangle correct to overlay (plus or minus 3 mm) 1 1 1 [3] No marks for 2D drawings *could be awarded for other types of pictorial drawing Upper rim of base correct to overlay *Lower rim of base parallel to upper rim *Depth of base correct (5 mm) Base of tube correct size to overlay Top of tube correct size to overlay *Internal diameter of tube shown *Height of upper circle above base (40 mm) *Upper circle offset (15 mm) * Evidence of construction – base (1) and tube (1) 1 1 1 1 1 1 1 1 2 [10] Intersections - Top point (within 5 mm) - Bottom point (ignore line) - Curved line from top point to top edge of tube Overall quality of enhancement Good 2, satisfactory 1 or poor 0 1 1 1 1 1 1 1 2 [5] [Total:

https://www.pdf-archive.com/2016/06/10/7048-w08-ms-1/

10/06/2016 www.pdf-archive.com

4024 s14 ms 12 96%

Page 2 Mark Scheme GCE O LEVEL – May/June 2014 Question 1 2 3 4 5 6 9 Mark (a) 14 1 (b) 0.3oe 1 (a) 9 1 (b) –2.5 1 (a) Decimal between 0.75 and 0.875 1 (b) Fraction between (a) 47 1 (b) 11 03 1 (a) 8.52 × 10–5 final answer 1 (b) 5 × 106 1 (a) Rotational symmetry of order 3 0 lines of symmetry 1 (b) Pattern completed correctly 1 54 2 (a) Isosceles 1 (b) 128° 1 (a) 25 oe final answer 28 1 (b) 3 7 8 Answers 10 (a) (b) 1 final answer 3 3 7 and 4 8 Syllabus 4024 1 2 406 000 000 oe 1 5 2 Paper 12 Part Marks E.g.

https://www.pdf-archive.com/2016/06/11/4024-s14-ms-12/

11/06/2016 www.pdf-archive.com

JATBMS 96%

behave politely and follow social conventions [Option ID = 2222] spell correctly [Option ID = 2223] write legibly and correctly [Option ID = 2224] ignore minor details [Option ID = 2225] Correct Answer :behave politely and follow social conventions [Option ID = 2222] 17) In the following question, two statements numbered I and II are given.

https://www.pdf-archive.com/2017/10/15/jatbms/

15/10/2017 www.pdf-archive.com

4024 s14 er 96%

Some correctly used and applied the formula for arc length.

https://www.pdf-archive.com/2016/06/11/4024-s14-er/

11/06/2016 www.pdf-archive.com

2008-1 95%

3 and 4 Which of the following pairs are correctly matched?

https://www.pdf-archive.com/2018/03/10/2008-1/

10/03/2018 www.pdf-archive.com

New Kill4exam Cico 200-155 Dumps PDF 95%

https://www.pdf-archive.com/2017/06/03/new-kill4exam-cico-200-155-dumps-pdf/

03/06/2017 www.pdf-archive.com

booklist 95%

https://www.pdf-archive.com/2016/03/08/booklist/

08/03/2016 www.pdf-archive.com

2048 w12 er 95%

Most candidates answered correctly.

https://www.pdf-archive.com/2016/06/11/2048-w12-er/

11/06/2016 www.pdf-archive.com

New Passitexams Cisco210-250-Dumps 95%

: 210-250 : CCNA Cyber Ops : Understanding Cisco Cybersecurity Fundamentals :

https://www.pdf-archive.com/2017/06/02/new-passitexams-cisco210-250-dumps/

02/06/2017 www.pdf-archive.com

7048 w09 ms 1 95%

Teachers’ version GCE O LEVEL – October/November 2009 Syllabus 7048 Front height and width - to overlay (2 x 1) 70 x 120 Plan width and depth - to overlay (2 x 1) 120 x 90 End height and depth - to overlay (2 x 1) 70 x 90 Front view Door position (10mm from right hand side) Door size to overlay (55 x 20) Window position (10mm from door) Window size to overlay (40 x 40) End view Window position (10mm from right hand side) Window size to overlay (30 x 40) Paper 01 2 2 2 1 1 1 1 1 1 [12] First part of symbol drawn correctly (two circles) Second part of symbol drawn correctly (truncated cone that matches the circles and lines up) Outline of three views projected (lined up) Symbol matches projection method used for all three views 1 1 1 1 [4] Ellipse the correct size - minor and major (2 x 1) Evidence of construction of ellipse High quality freehand outline of ellipse (to overlay) Isometric box any size added (30 degree lines) Isometric ‘string’ added to any size box Isometric box sizes complete and accurate to overlay 2 1 1 1 1 1 [7] Outline - 45 degree line at right hand top Outline - back horizontal Other lines may be present (inside detail) Door to the overlay Front window to the overlay End window (size 15 x 40 and 5mm from corner) Outline of shop sign added (freehand) Lettering and box added 1 1 1 1 1 1 1 [7] Colour relates to the theme ‘bright and bold’ - not pastel colours 1 Overall quality of colour application Excellent 3, good 2 and fair 1 Excellent - even tone, accurate to borders, window considered...

https://www.pdf-archive.com/2016/06/10/7048-w09-ms-1/

10/06/2016 www.pdf-archive.com

7048 w11 ms 1 95%

https://www.pdf-archive.com/2016/06/10/7048-w11-ms-1/

10/06/2016 www.pdf-archive.com

4024 w14 ms 11 95%

© Cambridge International Examinations 2014 Page 4 Mark Scheme Cambridge O Level – October/November 2014 Syllabus 4024 Paper 11 x + y = 6 drawn correctly 1 (b) 2y + x = 4 drawn correctly 1 (c) Correct region shaded, (FT for sloping lines with one correct line).

https://www.pdf-archive.com/2016/06/11/4024-w14-ms-11/

11/06/2016 www.pdf-archive.com