PDF Archive search engine
Last database update: 14 November at 19:12 - Around 220000 files indexed.
Results for «deformation»:
Total: 100 results - 0.039 seconds
lister et al 1978 Tectonophysics, 45 (1978) 107-158 0 Elsevier Scientific Publishing Company, Amsterdam - Printed in The Netherlands 107 THE SIMULATION OF FABRIC DEVELOPMENT IN PLASTIC DEFORMATION AND ITS APPLICATION TO QUARTZITE:
Sivakumar Strength of Materials Axial Deformations Introduction Free body diagram - Revisited Normal, shear and bearing stress Stress on inclined planes under axial loading Strain Mechanical properties of materials True stress and true strain Poissons ratio Elasticity and Plasticity Creep and fatigue Deformation in axially loaded members Statically indeterminate problems Thermal effect Design considerations Strain energy Impact loading Indian Institute of Technology Madras Strength of Materials Prof.
22311963 THERMAL DEFORMATION ANALYSIS OF ALUMINIUM HEAT SINK USING ELECTRONIC SPECKLE PATTERN INTERFEROMETRY Retheesh.R1, P.Radhakrishnan1, Rakesh Kumar Singh2, A.Mujeeb1 1 International School of Photonics, Cochin University of Science and Technology, Cochin22, Kerala, India 2 Indian Institute of Space Science and Technology, Thiruvanthapuram, Kerala, India ABSTRACT When a solid material is subjected to severe temperature variations, the structure of the material changes and produces a volumetric enlargement which induces stresses in the material.
2321-0869 (O) 2454-4698 (P) Volume-7, Issue-7, July 2017 Analysis of Interaction between Adjacent Buildings and Deformation of Foundation Pit Jihui-Ding, Taotao-Li, Xiaohui-Wang, Tuo-Zhao, Weiyu-Wang Abstract—When the soil body of deep foundation pit is excavated, the stress state of surrounding soil body is changed, and displacement of the soil bottom and side wall is occured.
Department of Mechanical Engineering, Malnad College of Engineering, Hassan, Karnataka, India ABSTRACT In the present investigation experimental and analytical characterization of the high temperature (superplastic) deformation of AA5083 alloy was carried out.
forming, most of the sheet metal undergoes a complicated deformation process that may comprise a sequence of stretching, bending, unbending and reverse bending processes.
[B15M1] Fractures in Children Dr.
EXPANSION WITH DEFORMATION VIRTUAL REALITY EXPANSION WITH DEFORMATION--VIRTUAL REALITY <!doctype html><html><head>
SESSIONS RSNA2015 PROSTATE Wednesday December 2 Scientific Posters ShearWave™ Elastography Presentations LL-NRE4480, 12:45 - 1:15pm, Learning Center, Hall D, Station#2 Patient-specific Prostate Deformation Modelling via ShearWave tography for TRUS-guided Interventions TM Elas- BREAST Yi Wang Hong Kong, Hong Kong (Presenter), Dong Ni, BEng, MPH Hongkong, China, Jing Qin Shenzhen, China, Ming Xu Guangzhou, China, Xiaoyan Xie Guangzhou, China, Pheng Ann Heng, PhD Shatin, Hong Kong PURPOSE:
Press brake bending is the most general industrial process today to obtain the controlled deformation of the sheetmetal in cold with the use of press brake power (hydraulic or electric system) to obtain necessary force with the travel of the beam together with the upper punch.