PDF Archive search engine
Last database update: 18 June at 22:06 - Around 220000 files indexed.
Results for «frequencies»:
Total: 1000 results - 0.017 seconds
Waite LF 98%
Waite LF Low-‐Frequency Volcanic Seismicity Source processes and implica0ons of tremor, LP and VLP earthquakes at open-‐ vent volcanoes TREMOR, LP, AND VLP CHARACTERISTICS • Primarily deﬁned on the basis of the frequency content • These all can be considered “low-‐frequency” seismicity TREMOR, LP, AND VLP CHARACTERISTICS Short-period seismometers Broad-band seismometers TREMOR, LP, AND VLP CHARACTERISTICS Low-‐Frequency (LF) Seismicity • Primarily deﬁned on the basis of the frequency content • These all can be considered “low-‐frequency” seismicity GENERAL VOLCANIC EARTHQUAKE CLASSIFICATION • HF (high frequency) or VT (volcano tectonic) – tectonic earthquakes (slip on a fault) – Clear P and S wave arrivals • LF (low frequency) – Typically no clear S wave – Low frequencies due to source and/or path
Partial Discharge Analysis in High-Frequency Transformer Based on High-Frequency Current Transducer 97%
A PD measurement platform applying different frequencies was set up in this manuscript.
Frictive sounds like S, H and F are high in pitch, which is why high frequencies help with speech understanding.
High frequencies help with speech understanding, because fricative sounds like S, H, and F are high in pitch.
thyristors for frequencies up to about 10 kHz, IGBTs up to about 100 kHz and PowerMOS up to about 400 kHz.
The inclusion of the split-ring slot and the U-shaped slot in the partial ground plane gives resonance at two additional frequencies.
HIOKI IM3570 ENG 91%
HIOKI IM3570 ENG IMPEDANCE ANALYZER IM3570 Component measuring instruments Single Device Solution for High Speed Testing and Frequency Sweeping With this new IM3570 Impedance Analyzer, an LCR meter and an impedance analyzer capable of measurement frequencies of 4 Hz to 5 MHz and test signal levels of 5 mV to 5 V have been combined into one measuring instrument.
It's absolutely critical that you adapt a system which can work on different frequencies, because the last thing you need is to be picking up the frequencies from another person's baby monitor or device, instead of the sounds from your own baby.