Search
PDF Archive search engine
Last database update: 17 March at 11:24 - Around 76000 files indexed.
Results for «heater»:
Total: 200 results - 0.061 seconds
EDM - ADP Unit Heater Promo - Fall 2016 100%
2016/2017 HEATING SEASON PRICING Part # FSA-N-30 FSA-N-45 FSA-N-60 FSA-N-75 Description Low Profile Unit Heater 30MBH Low Profile Unit Heater 45MBH Low Profile Unit Heater 60MBH Low Profile Unit Heater 75MBH Part # SEP-100A-N SEP-115A-N SEP-145A-N SEP-175A-N SEP-200A-N SEP-230A-N SEP-250A-N SEP-300A-N Part # SEP-100A-N SEP-115A-N SEP-145A-N SEP-175A-N Description Gas-fired unit heater 100MBH Gas-fired unit heater 115MBH Gas-fired unit heater 145MBH Gas-fired unit heater 175MBH Price $950 $1,050 $1,150 $1,250 Description Gas-fired unit heater 100MBH Gas-fired unit heater 115MBH Gas-fired unit heater 145MBH Gas-fired unit heater 175MBH Gas-fired unit heater 200MBH Gas-fired unit heater 230MBH Gas-fired unit heater 250MBH Gas-fired unit heater 300MBH Price $675 $675 $700 $775 $800 Price $950 $1,050 $1,150 $1,250 $1,350 $1,450 $1,550 $1,750
https://www.pdf-archive.com/2016/10/04/edm-adp-unit-heater-promo-fall-2016/
04/10/2016 www.pdf-archive.com
Townhouse Hot Water Heater Instructions 99%
ELECTRIC WATER HEATER INSTALLATION AND OPERATING INSTRUCTIONS For Brands:
https://www.pdf-archive.com/2017/11/23/townhouse-hot-water-heater-instructions/
23/11/2017 www.pdf-archive.com
S5P~us~en~file=S5PC2004~gen~ref 99%
412-02-1 Heating and Ventilation 412-02-1 REMOVAL AND INSTALLATION Heater Hose — 5.4L and 6.8L Removal and Installation All vehicles 1.
https://www.pdf-archive.com/2011/10/19/s5p-us-en-file-s5pc2004-pdf-gen-ref/
19/10/2011 www.pdf-archive.com
Technical Bulletin Number 281 98%
b) Heater fitted in engine room and running too hot (poor engine room ventilation).
https://www.pdf-archive.com/2011/04/19/technical-bulletin-number-281/
19/04/2011 www.pdf-archive.com
Kanthal electrical ladle heaters S-KA074-PS-ENG LR 97%
Kanthal ladle heater installations offer energy efficient solutions for heating and pre-heating up to ladle temperatures of 1500°C (2732°F) and ladle sizes from ID 500 mm to ID 2100 mm (19.69 – 82.68 inches).
https://www.pdf-archive.com/2018/04/06/kanthal-electrical-ladle-heaters-s-ka074-ps-eng-lr/
06/04/2018 www.pdf-archive.com
Ladle Heater Marketing Case Story PDF 111413 95%
An electric heater will cut energy costs – but do the benefits end there?
https://www.pdf-archive.com/2018/04/06/ladle-heater-marketing-case-story-pdf-111413/
06/04/2018 www.pdf-archive.com
HAARP Congressional hearing on upgrade - expansion Poker flat rocket range 93%
DESIRED HF HEATING FACILITY 4.1 Heater Characteristics 4.1.1 Effective-Radiated-power (ERP] 4.1.2 Frequency Range of Operation 4.1.3 Scanning Capabilities 4.1.4.
https://www.pdf-archive.com/2019/01/26/untitled-pdf-document-13/
26/01/2019 www.pdf-archive.com
metro transit 14-1 2 93%
GILLIG LF BRT PLATE AIR TANK MTG GILLIG PHANTOM ARMATURE HEATER CIRC PUMP (24 VOLT) GMC#2036379 BALLAST INTERIOR LIGHTS GILLIG 51-02186-007 BAR WINDOW RELEASE PASS SLIDER 56"
https://www.pdf-archive.com/2016/11/14/metro-transit-14-1-2/
15/11/2016 www.pdf-archive.com
How to Stop Chemtrails and Haarp 93%
https://www.pdf-archive.com/2015/03/20/how-to-stop-chemtrails-and-haarp/
20/03/2015 www.pdf-archive.com
Schedule - 10 Manse Park, Brora, KW9 6PT 92%
3.6m x 5.1m Lovely bright room which features windows to both the front and rear, as well a feature electric fire (which could be opened up to the original open fire), storage cupboard, heater, numerous power points, phone point, Sky TV point &
https://www.pdf-archive.com/2016/07/19/schedule-10-manse-park-brora-kw9-6pt/
19/07/2016 www.pdf-archive.com
47-59 Chevy Truck web 92%
Heater Tag . ... .114 Brackets, Heater Hose Retainer .
https://www.pdf-archive.com/2017/11/25/47-59-chevy-truck-web/
25/11/2017 www.pdf-archive.com
Case Strory LadleHeatingSystem 6 (1) 91%
41.7 MJ/m3 • Average gas consumption 6 m3/h (24 Nm / 4 hours) 3 Sandvik Materials Technology System Electrical ladle heating system 4 • Heating elements made of Kanthal® Super RA (12/24) with 3D configuration • Heater unit is automatically raised and lowered hydraulically • Heater specification 54kW/600A • Attachments on both sides to minimize heat loss from the spouts Sandvik Materials Technology Heater unit When preheating Visual comparison Gas burner system vs electrical heating system 5 • There is a small gap between the gas burner and the ladle for exhaust gas, whereas there is no clear gap on the electrical heater • The electrical heating system is equipped with a shielding cover for safety.
https://www.pdf-archive.com/2018/04/06/case-strory-ladleheatingsystem-6-1/
06/04/2018 www.pdf-archive.com
Burda-Flyer-EN 90%
Elegant, compact and simple to use, this heater was created for simple heating of outdoor areas.
https://www.pdf-archive.com/2014/03/11/burda-flyer-en/
11/03/2014 www.pdf-archive.com
1434385544 1 (5) 89%
Magnetic heater inspired by energy www.emolio.com/MagneticHeater This is FREE document with much less informations and without technical drawings. For FULL document with technical drawings go to http://www.emolio.com/MagneticHeater This is FREE document with NO much details, like technical (CAD) drawings. For FULL document with technical drawings go to http://www.emolio.com/MagneticHeater Magnetic heater description The magnetic system is a multifunctional system designed for central heating. This means that it can be adapted to existing central heating systems, as well as different applications. One of the ways the system works is that it heats the water that heats your home. The other option is to heat thermal oil, which then heats the water in the buffer which then heats your home. It is the choice of the user, we must specify that the option of heating the thermal oil brings greater efficiency in spending the energy. The magnetic system is based on the principle of natural law (Lentz law) copper as non ferro metal reacts to magnetic induction by creating heat. This principle has long been used in the auto industry as well as on certain appliances such as air conditioners. Magnetic heating in this application is a new design (construction) for implementing lowenergyuse heating systems. The purpose of this document is to use this opportunity (open source) to share, help and encourage consumers to make their own magnetic system, which compared to others is the most effective heating of modern times. We have to state that you need professional help in the construction of the magnetic system. From us you can expect such support, information, training courses, books, parts as well as a complete magnetic heating machine. In our case it is handwork rather than mass production and all profit goes to developing this or any other energy systems that helps you as consumer to use less energy. The durability of the device is only limited to the replacement of certain parts (such as an electric motor), the durability of the other parts is very longterm. The basic machine is running smoothly with minimal maintenance. It is important to note that the current model of magnetic heating works on a threephase electrical energy motor, and that future systems will be adapted to single phase electromotor. The device is a noncomplicated magnetic heating device which has a steel construction to support all parts such as an electric motor (with a difference of power from 1 to 5 kw / h), aluminium disk, magnets, copper cauldrons and the necessary electronics that regulate the turning on and off and it is connected to a thermostat that measures the temperature of water or thermal oil. The principle of operation is based on magnetic induction, so the electric motor runs the aluminum disk in which a number of magnets has been integrated. The field of magnetic induction is created when the disk reaches a certain speed and the copper reacts on that with heating up. So the copper cauldron heats up due to the magnetic induction and the heat is transferred to water or thermal oil (as already stated in the document). The principle of operation is simple and all of the energy used is by electric motors. Use and efficiency of magnetic heating depends on the existing central heating system where you place the magnetic heating, as well as the square footage of space that is heated. The entire unit of the magnetic heating system runs on low power consumption and can be customized, for instance by adapting the distance between the disk with magnets and the copper cauldron. A larger distance, calls for less power consumption. The user can customize the temperature in relation to personal wishes as to minimal and maximal temperature in the home. Compared to existing systems, magnetic heating uses a minimal amount of electricity and is very efficient when it comes to saving electricity. In addition, please note that the magnetic heater does not require additional maintenance such as cleaning, neither does it create emission of CO2. In other words, the system is 100% functional with minimal maintenance costs and high financial benefits due to the lower electrical inputs . For more details about everything read on ... This is FREE document with NO much details, like technical (CAD) drawings. For FULL document with technical drawings go to http://www.emolio.com/MagneticHeater Foreword My personal experience I gained after purchasing our house (240 square meters) in which there was a warming system based on oil fuel. I want to use this opportunity to show you that choosing to install the magnetic heater pays off in one year.; The seller of the house informed us that 2,000 liters of heating oil on an annual basis would be enough to heat the house, but already the first winter season I realized that the heating needs more than double of that. Faced with this fact I reviewed all existing systems and came to the conclusion that it would be profitable to try to make a magnetic system that could reduce the consumption with at least 70%. An additional advantage, and in my opinion an important one, is that the magnetic system is much more healthy than using oil or gas. And so it all began … In the beginning it took me a long time to understand in what way I should address the basic issues, my experiments have led to the development of this heating unit. My search has resulted in a product that is ready for use and is currently the most efficient. Just to mention some of the main points / problems I encountered: copper parts should be professionally welded and safe to withstand the pressure of minimum 3 bar / the copper part that I use can work at 8 bar, finding out what electric motor (kw/h) is best for a certain output in relation to either heating water or thermal oil magnets should be placed under the rules of north / south and alternately, Disk needs to be precise the distance between the disk and the boiler is adjustable, and the same is dependent consumption, etc ... These are all points that you need to pay attention to when making or setting up the system. It is important to call for the support of a professional plumber and electro technician. For all your questions you can contact me … Everything has a beginning and an end, but this project has been one of which I am very glad that despite all the attempts we have managed to make a magnetic heater. And I hope that others will learn from my experience, therefore, do not have to start from scratch, will experience less failures and achieve greater efficiency. In this era of innovation, energy saving is increasingly represented as a major theme. Outdated technologies are replaced with new systems that are adapted depending on the existing suppliers. Users, understandably, are interested in whether an investment will be profitable and worthwhile. We are proud to say that the magnetic heating system is reliable and economical on the long run, plus easy to install and maintain. We can, from personal experience, say that the magnetic system meets all the requirements expected of modern technology era. We have already had our investment paid back, and each new winter is saving on heating. The system is installed by using the existing hot and cold water pipes. (I like to mention that it is profitable to think about changing to floor and/or wall heating instead of using radiators) , builtin electronics regulate automatic switching the motor on and off which helps save energy. in addition it is an builtin security that the system will not overheat. There is no need for maintenance and cleaning, nor is there exhaust gas in the house. In short we are satisfied, and we want you the have the same experience....
https://www.pdf-archive.com/2015/07/20/1434385544-1-5/
20/07/2015 www.pdf-archive.com
60-72 Chevy Truck web 89%
156-161 Defrost and Heater Duct Hoses .
https://www.pdf-archive.com/2017/11/25/60-72-chevy-truck-web/
25/11/2017 www.pdf-archive.com
Self-Heating Fully Cooked Homestyle Meals 88%
Tear top of heater pack and remove heater.
https://www.pdf-archive.com/2017/04/27/self-heating-fully-cooked-homestyle-meals/
27/04/2017 www.pdf-archive.com
Anselmo, Station Road, Elmswell 87%
Entrance Hallway With obscure uPVC double glazed entrance door, airing cupboard housing hot water cylinder, electric storage heater, telephone point, doors to lounge, bedrooms and bathroom.
https://www.pdf-archive.com/2014/06/26/anselmo-station-road-elmswell/
26/06/2014 www.pdf-archive.com
Arista -Floorplan Brochure 86%
REF SPACE OPT SOFT WATER LOOP TANKLESS WATER HEATER FENCE w/ GATE RETURN COOKTOP /HOOD ENTRY D/W D W KITCHEN BOOT BENCH WIC OPT CABS LINEN CABS 13'-8"
https://www.pdf-archive.com/2017/01/03/arista-floorplan-brochure/
03/01/2017 www.pdf-archive.com
BurdaWTG-infrared-heaters-Catalog-2012-EN 85%
Whether in the hotel or catering industry or in private areas the BURDAWTG infrared short-wave technology heater and cooler product range convinces the world leading brands and industries (MS Europa, the best cruise liner in the world).
https://www.pdf-archive.com/2014/03/11/burdawtg-infrared-heaters-catalog-2012-en/
11/03/2014 www.pdf-archive.com
MQ-2 84%
Standard work condition Symbol Vc VH RL RH PH Parameter name Circuit voltage Heating voltage Load resistance Heater resistance Heating consumption Technical condition 5V±0.1 5V±0.1 can adjust 33Ω±5% less than 800mw Remarks AC OR DC ACOR DC Technical condition -20℃-50℃ -20℃-70℃ less than 95%Rh 21%(standard condition)Oxygen concentration can affect sensitivity Remarks Room Tem B.
https://www.pdf-archive.com/2013/05/03/mq-2/
03/05/2013 www.pdf-archive.com
GEM EHW 83%
The result is not just a better water heater, but an efficient and intelligent potential leak paths for improved reliability.
https://www.pdf-archive.com/2014/07/30/gem-ehw/
30/07/2014 www.pdf-archive.com
How to stop Chemtrails and HAARP 157 slides 83%
https://www.pdf-archive.com/2015/03/17/how-to-stop-chemtrails-and-haarp-157-slides/
17/03/2015 www.pdf-archive.com
Defender FFR Wiring diagram(2) 81%
Heater motor. Heater motor switch. ... Diesel heater/start switch.
https://www.pdf-archive.com/2016/04/10/defender-ffr-wiring-diagram-2/
10/04/2016 www.pdf-archive.com
BMWTurbo For Sale Rev 1 79%
1yr old, with poly bushes, removed and replaced but weren't the issue E34 strut inserts, unknown condition, but with strut tops PN 312254 E32/34 electric seat switches, flapper motors etc E32/34 electric seat motors, cables switches etc E32/34 heater valve with pump NOT working E32/34 heater valve rebuildable early type, w/spare valves, WORKING E32 wiper mechanism with motor, WORKING, but some slop in bushes E32 Tweeter pods with tweeters E32 Pass (?) side fog light E32 Pass Side Door Handle - parts E32 Side indicators Orange E32 Corner Indicators Orange (appear different colours in photo, but I never noticed on car) E32 16 button OBC Unknown Condition - Consider NOT working E32 Factory OBC, working when removed E32/BMW High Volume washer motors, both working E32 Heater Core, appears in good nick, never tested, but no leaks when removed E32 Headlight Aim Control Actuators E32 Interior Door handles E30 Brake ducts, misc all with one or more broken clips E32 735 Radiator Overflow Tank Med Case 3.46 LSD w/e30 rear Med Case 3.15 Open diff E21 backing plate I think E30 320i (I think) tail shaft E30 Front guards, one genuine, one brand new replacement part E30 carbon covered fibreglass sunroof, a bit blemished 2jz factory fuel rails x2 1jz idle speed control valves x2 1jz std BOV 2jz Auto Valve Body with std springs 1jz converters that have surface rust 2jz converters that have surface rust 2jz Auto bellhousing 1jz exhaust VVTi exhaust valves (used) JZA70 Open Diff Soarer JZZ30 Torsen 3.98 (?) LSD Walbro/copy type in-tank fuel pump (used) Aristo Ambi unit servo motor and controller(?) TRE 340 in-tank fuel pump, used for mounting only Parts needed (willing to swap anything from the above of similar value) BMW E30 E30 indicator stalk BMW E30 E30 lock set - 2dr, incl barrel and glovebox BMW E30 E30 Series 1 rear lights with inner covers BMW E30 E30 Sunroof seal Rev 1 Revisions 23/07/2014 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 Image Link 2 3 4 2 3 4 2 3 4 2 3 4 2 3 4 2 3 4 2 3 4 2 3 4 2 3 4 2 3 4 2 3 4 2 3 4 2 3 4 2 3 4 2 3 4 2 3 4 2 3 4 2 3 4 2 3 4 2 3 4 2 3 4 2 3 4 2 3 4 2 3 4 2 3 4 2 3 4 2 3 4 2 3 4 2 3 4 2 3 4 2 3 4 2 3 4 2 3 4 2 3 4 2 3 4 2 3 4 2 3 4 2 3 4 2 3 4 2 2 2 2 3 3 3 3 4 4 4 4 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5
https://www.pdf-archive.com/2014/07/24/bmwturbo-for-sale-rev-1/
24/07/2014 www.pdf-archive.com
Vertice Brochure- Mar19 79%
Water / Fuel Thermocouple Wire Flexible Cables Tubelights, UV Lamps Encoder Photo Sensor Emergency Exit Lights IP65 Proximity Switch Band Heaters Ignition Transformer Oil / Gas Burner Controllers Ignition Electrode Cartridge Heater Pointed tip Pt-100 with Teflon Wire Vertice Building Material Trading LLC P.O.
https://www.pdf-archive.com/2019/02/28/vertice-brochure--mar19/
28/02/2019 www.pdf-archive.com