PDF Archive

Easily share your PDF documents with your contacts, on the Web and Social Networks.

Share a file Manage my documents Convert Recover PDF Search Help Contact


Search


PDF Archive search engine
Last database update: 04 July at 18:17 - Around 220000 files indexed.

Show results per page

Results for «impeller»:


Total: 120 results - 0.039 seconds

Warman Equivalent Slurry Pump Catalog 100%

An easy means of external impeller adjustment is provided in a convenient position below the bearing housing.

https://www.pdf-archive.com/2018/08/06/warman-equivalent-slurry-pump-catalog/

06/08/2018 www.pdf-archive.com

Tobee® TG Gravel Pumps 95%

Impeller expulsion vanes reduce gland pressure and intrusion of high concentrations of solids in the gland area.

https://www.pdf-archive.com/2019/08/08/tobee-tg-gravel-pumps/

08/08/2019 www.pdf-archive.com

Tobee® Vertical Slurry Pumps 95%

optional recessed impeller and suction agitator available.

https://www.pdf-archive.com/2019/08/08/tobee-vertical-slurry-pumps/

08/08/2019 www.pdf-archive.com

Warman SP, SPR Vertical Slurry Pumps 95%

optional recessed impeller and suction agitator available.

https://www.pdf-archive.com/2019/08/08/warman-sp-spr-vertical-slurry-pumps/

08/08/2019 www.pdf-archive.com

GE Type Horizontal End Suction Centrifugal Pump 92%

There are three different impeller type can be chosen according to different request:

https://www.pdf-archive.com/2017/10/26/ge-type-horizontal-end-suction-centrifugal-pump/

26/10/2017 www.pdf-archive.com

Simulation report Paints 90%

power law • Impeller speed:

https://www.pdf-archive.com/2017/09/22/simulation-report-paints/

22/09/2017 www.pdf-archive.com

Chemical Process Pump 86%

There are three different impeller type can be chosen according to different request:

https://www.pdf-archive.com/2017/10/26/chemical-process-pump/

26/10/2017 www.pdf-archive.com

NMZ Type Horizontal Split Case Centrifugal Pump 86%

And the double suction impeller ensures high efficiency.

https://www.pdf-archive.com/2017/10/26/nmz-type-horizontal-split-case-centrifugal-pump/

26/10/2017 www.pdf-archive.com

CNSME. Pump Catalog - 副本 (2) 85%

The frame plate liner and impeller for SBH pump are adoptable of hard metal only.

https://www.pdf-archive.com/2020/01/07/cnsme-pump-catalog----2/

07/01/2020 www.pdf-archive.com

5 Fuel System and Throttle Body 85%

J____ RELIEVED FUEL Fuel injector vo FUEL SYSTEM AND THROTTLE BODY 5- 3 FUEL PUMP The electric fuel pump is mounted at the bottom of the fuel tank, which consists of the armature, magnet, impeller, brush, check valve and relief valve .

https://www.pdf-archive.com/2016/04/13/5-fuel-system-and-throttle-body/

13/04/2016 www.pdf-archive.com

High Chrome Alloy Pump Parts-China 84%

TABLE OF ILLUSTRATIONS Figure 4-3 Type L Pump 4-3 Figure 4-4 Type AHU Pump 4-4 Figure 1-1 — Impeller Vane Profiles 1-2 Figure 4-5 Type D Pump 4-5 Figure 1-2 — Impeller/Casing Flow Patterns 1-3 Figure 4-6 Type TC/C Pump 4-6 Figure 1-3 — Standard and Non-Standard Impeller Types 1-4 Figure 4-7 Type SP Pump 4-7 Figure 1-4 — Reduced Diameter Impellers 1-5 Figure 4-8 Type SPR Pump 4-8 Figure 1-5 — Pump Casing Shapes 1-5 Figure 4-9 Type HDSP Series AHU/C Pump 4-9 Figure 2-1 Three Main Modes of Abrasive Wear 2-1 Figure 4-10 Type V-TC Pumps Figure 2-2 Three Main Modes of Erosive Wear 2-2 Figure 6-1 Typical Hf Curve For Category 'A' Slurries 6-3 Figure 2-3 Performance of Centrifugal Pumps on Slurry 2-5 Figure 6-2 Warman Pipe Friction Chart 6-6 Figure 2-4 Typical Pump Performance Test Graph On Water 2-7 Figure 6-3 Pipe Diameter 6-7 Figure 2-5 Typical Pump Performance Graph 2-8 Figure 7-1 Total Dynamic Head With Positive Intake Head 7-5 Figure 2-6 Typical System Resistance Curve 2-10 Figure 7-2 Total Dynamic Head with Negative Intake Head 7-6 Figure 2-7 Typical Duty Point Curve 2-10 Figure 7-3 Equivalent Lengths of Pipe Fittings and Valves 7-7 Figure 2-8 Typical Graph Showing Pump Speed Variations 2-10 Figure 7-4 Head Losses at Inlet, Contraction and Enlargement 7-8 Figure 2-9 Typical Graph Showing System Variations 2-11 Figure 7-5 Differential Column Head Loss 7-9 Figure 2-10a Centrifugal (or Dynamic) Seal Arrangements 2-12 Figure 8-1 Durand's Limiting Settling Velocity Parameter(For Particles of Closely Figure 2-10b Typical Centrifugal Seal Performance Curve 2-12 Graded Sizing) Figure 2-11 Gland Seal Arrangement 2-13 Figure 8-2 Modified Durand's Limiting Settling Velocity Parameter(For Particles of Figure 2-12 Typical Mechanical Slurry Seal 2-14 Widely Graded Sizing) 8-4 Figure 2-13 Typical Pump Sump And Natural Flow Control Principle 2-16 Figure 9-1A NPSHa for Positive Suction Conditions 9-3 Figure 2-14 Typical Pump Sump Arrangement for Aerate/Frothy Slurries 2-17 Figure 9-1B NPSHa for Negative Suction Conditions 9-4 Figure 2-15 Pump Discharge Orientation To Minimize Air Locking 2-18 Figure 9-1C NPSHa Pumping from a Closed Pressurized Vessel 9-5 Figure 2-16 Typical Cyclone Arrangement 2-19 Figure 9-1D NPSHa Pumping from a Closed Vessel Under Vacuum 9-6 4-10 8-3 Figure 3-1 Typical Warman Preliminary Selection Chart 3-3 Figure 9-2 Approximate Barometric Pressures 9-7 Figure 3-2 Typical Conical Enlargement 3-4 Figure 9-3 Absolute Vapor Pressure of Pure Water 9-7 Figure 3-3 Typical Pump Application 3-10 Figure 10-1 Single Pump 10-2 Figure 3-4 Warman Pump Performance Curve 3-11 Table 10-2 Calculation of Power and Head for Multi-Stage Sets 10-3 Figure 4-1 Type AH Pump 4-1 Figure 10-3 Two-Stage Pump Unit 10-3 Figure 4-2 Type GP Pump 4-2 Figure 10-4 Four-Stage Pump Unit 10-4

https://www.pdf-archive.com/2016/01/29/high-chrome-alloy-pump-parts-china/

29/01/2016 www.pdf-archive.com

COT Type Horizontal Easy 83%

export@croospump.com Croos Pump (Shanghai) Co., Ltd http://www.croospump.com/ Fully enclosed, balanced and one piece-type impeller is designed to reduce the vibration and noise.

https://www.pdf-archive.com/2017/10/26/cot-type-horizontal-easy/

26/10/2017 www.pdf-archive.com

Axial Split Casing Centrifugal Pump 83%

The closed double suction impeller can lower the NPSHr due to each impeller eye only handles half of the total pump flow rate.

https://www.pdf-archive.com/2017/10/26/axial-split-casing-centrifugal-pump/

26/10/2017 www.pdf-archive.com

croospump 80%

In case the diameter clearance between the wear ring and the impeller exceeds 2mm, the wear ring should be replaced.

https://www.pdf-archive.com/2017/10/26/croospump/

26/10/2017 www.pdf-archive.com

DESIGN AND TEST RESULTS ON AGENA 2000 80%

While this "Thrust Chamber From Agena Injector From test series was hi progress, a From Transtar, Agena turbopump assembly (TPA) with U/R OME a state-of-the-art inducer, Gas impeller and turbine rotor was Generator fabricated and mated with an From Agena existing Model 8096 Agena gear Turbopump from box.

https://www.pdf-archive.com/2017/05/31/design-and-test-results-on-agena-2000/

31/05/2017 www.pdf-archive.com

Equivalent to warman AH AHR HH ST QV pumps ,OEM Slurry pumps and pump parts-SME Slurry Pump (7) 78%

SH /200ST sales99@cnmineralsequipment.com Shijiazhuang Minerals Equipment Co., ltd Construction Design Metal Liner 1 Liner 2 Frame plate 3 Back liner 4 Cover plate 5 Front liner 6 Impeller 7 Expeller ring 8 Shaft sleeve 9 Expeller 10 Bearing assembly Construction Design Rubber Liner 1 Frame plate 2 Expeller ring 3 Packing gland 4 Shaft sleeve 5 Expeller 6 Frame plate liner 7 Impeller 8 Cover plate liner 9 Cover plate Base type Discharge diameter(mm) Slurry Pump Series SL / 1 0 0 D Base type Discharge diameter(mm) Low abrasive slurry pump ·2· ·3·

https://www.pdf-archive.com/2020/01/07/untitled-pdf-document-4/

07/01/2020 www.pdf-archive.com

warman AH AHR HH pumps-SME Slurry Pump (3) 78%

SH /200ST Metal Liner 1 Liner 2 Frame plate 3 Back liner 4 Cover plate 5 Front liner 6 Impeller 7 Expeller ring 8 Shaft sleeve 9 Expeller 10 Bearing assembly Construction Design Rubber Liner 1 Frame plate 2 Expeller ring 3 Packing gland 4 Shaft sleeve 5 Expeller 6 Frame plate liner 7 Impeller 8 Cover plate liner 9 Cover plate Base type Discharge diameter(mm) Slurry Pump Series SL / 1 0 0 D Base type Discharge diameter(mm) Low abrasive slurry pump ·2· ·3·

https://www.pdf-archive.com/2020/01/08/warman-ah-ahr-hh-pumps-sme-slurry-pump-3/

08/01/2020 www.pdf-archive.com

Pedal Boat 76%

The pedal boat is ridding by visitors through running the foot rotation impeller in order to impeller of drainage.

https://www.pdf-archive.com/2018/01/30/pedal-boat/

30/01/2018 www.pdf-archive.com

Mud Pump-the Classification and Function 76%

It consists of volute, impeller, shaft, pump casing, support tube, motor base, electric motor.

https://www.pdf-archive.com/2016/03/04/mud-pump-the-classification-and-function/

04/03/2016 www.pdf-archive.com

Mud Pump-Precautions in Using 76%

Whether the gap between the impeller and the guard plate is appropriate can influent mud pump lifespan.

https://www.pdf-archive.com/2016/03/04/mud-pump-precautions-in-using/

04/03/2016 www.pdf-archive.com