Search


PDF Archive search engine
Last database update: 20 April at 18:06 - Around 76000 files indexed.


Show results per page

Results for «mould»:


Total: 110 results - 0.055 seconds

UK retail catalogue 201113.indd 96%

2 UK retail catalogue 201113.indd 2 25/11/2013 13:11 INSTRUCTIONS FOR USE Note that some moulds with deep, narrow cavities (such as the baby shoe moulds) or with undercuts (such as the sleeping baby moulds) can require significant care to both fully fill the mould and to remove the model successfully.

https://www.pdf-archive.com/2013/12/05/uk-retail-catalogue-201113-indd/

05/12/2013 www.pdf-archive.com

Questionnaire CellaCast 89%

Runner of blast furnace / cupola furnace Runner of casting machine Inside the melting furnace Holding furnace ĺ transport ladle Transport ladle ĺ casting ladle Half automatic casting machine casting ladle ĺ mould Manual casting casting ladle ĺ mould Transfer of the molten metal:

https://www.pdf-archive.com/2016/04/12/questionnaire-cellacast/

12/04/2016 www.pdf-archive.com

COBOO 2018 COLOURBOOK rgb 14to27 89%

INTERIOR WALL PAINTS Dulux PureAir™ Keeps air fresh after painting • Airfresh™ Technology, keeps air fresh after painting • Mould &

https://www.pdf-archive.com/2018/01/19/coboo-2018-colourbook-rgb-14to27/

19/01/2018 www.pdf-archive.com

Gazechim Brochure Nov 2012 89%

Complexes Multiaxials/Combinations 3D Closed Mould Fabrics/Reinforcements Non-Woven Technologies Surface Tissue - Veil Speciality Fabrics Thermoplastic Glass Reinforcements 8 8 8 8 9 9 9 10 11 11 12 12 13 Carbon/Prepreg Fabrics W E S T &

https://www.pdf-archive.com/2012/11/06/gazechim-brochure-nov-2012/

06/11/2012 www.pdf-archive.com

17. Condensation - 07.08.2015 84%

This leads to streaming windows and walls and ultimately to mould.

https://www.pdf-archive.com/2015/10/09/17-condensation-07-08-2015/

09/10/2015 www.pdf-archive.com

Nuno Msc MecEng IST 83%

First time introduced to a mould assembly line, where i had the opportunity to learn with people that had years of working experience.

https://www.pdf-archive.com/2016/12/20/nuno-msc-meceng-ist/

20/12/2016 www.pdf-archive.com

Dragon SV Error List v1.1 83%

However stringers tops are flush with tank mould line - stringers should sit on top of tank mould line.

https://www.pdf-archive.com/2015/12/10/dragon-sv-error-list-v1-1/

10/12/2015 www.pdf-archive.com

engineering notes 82%

Lubricants Make the polymer easier to mould.

https://www.pdf-archive.com/2016/08/22/engineering-notes/

22/08/2016 www.pdf-archive.com

Application Note CellaCast 201506 en 80%

A molten mass which is not hot enough will exhibit poor metal flow within the complex passages of the mould and may result in bubbles or cavities.

https://www.pdf-archive.com/2016/04/12/application-note-cellacast-201506-en/

12/04/2016 www.pdf-archive.com

Mattress Guide 79%

When heat and pressure is applied, it will mould around the subject and once pressure is relieved the memory foam material will regain its original shape.

https://www.pdf-archive.com/2012/12/04/mattress-guide/

04/12/2012 www.pdf-archive.com

Hannah Maiden,Keim - Healthy Buildings, ASBP 77%

Solvents, Mould & ... Solvents, Mould &

https://www.pdf-archive.com/2016/01/21/hannah-maiden-keim-healthy-buildings-asbp/

21/01/2016 www.pdf-archive.com

Neil May, UCL - Healthy Buildings, ASBP 77%

airtightness, insulation – New build – Retrofit of existing buildings • Changing lifestyles • Changing building forms, occupation and tenure – the housing crisis context • Changing climate • Changing knowledge and evidence International concern – WHO report into Dampness and Mould 2009 • Clear connection between damp, moulds and ill health.

https://www.pdf-archive.com/2016/01/21/neil-may-ucl-healthy-buildings-asbp/

21/01/2016 www.pdf-archive.com

Jucker.César 77%

VOLUNTARY WORK Planned Volunteer rebuilding after 2015 earthquake, Kathmandu, Nepal 09-12 2016 Internship at DVK, Geneva, Switzerland 06-08 2015 Internship at Groupe8 Asia, Hanoi, Vietnam 07-08 2014 Internship at FSZ Architeketen, Berlin, Germany 09-10 2013 Internship at Atelier Jean Nouvel, Barcelona, Spain 07-08 2011 Internship in a masonry trade company, Grignan, France SKILLS LANGUAGES Adobe Creative Suite French - mother tongue Autocad 2D English - IELTS level 7 Microsoft Office German - fluent 3 MEASURES September 2014 I Lausanne I EPFL Reusable mould of the void, I &

https://www.pdf-archive.com/2017/01/13/jucker-ce-sar/

13/01/2017 www.pdf-archive.com

ONEAAC-PANEL-EXTERNAL-WALL-SYSTEM-DESIGN-GUIDE 76%

The mix is poured into a mould (a very large cake tin), to approximately 2/3 of the height of the mould, almost instantly the expanding agent reacts with the other elements, and the mix begins to rise in the mould.

https://www.pdf-archive.com/2017/08/26/oneaac-panel-external-wall-system-design-guide/

26/08/2017 www.pdf-archive.com

Dean Hayden 1974 70%

Dean Hayden PROFESSIONAL PROFILE Design &

https://www.pdf-archive.com/2017/09/29/dean-hayden-1974/

29/09/2017 www.pdf-archive.com

Brochure CellaCast PA83 68%

A molten mass which is not hot enough will exhibit poor metal flow within the complex passages of the 2 Lens system mould and may result in bubbles or cavities.

https://www.pdf-archive.com/2016/04/12/brochure-cellacast-pa83/

12/04/2016 www.pdf-archive.com