PDF Archive search engine
Last database update: 25 October at 15:41 - Around 76000 files indexed.
± 0.01 V or less (between outputs on the same line with no load) Voltage monitoring accuracy ±2% of output voltage ± 0.5 V n SM7810 Specifications Number of channels Measurement method Applied voltage Ammeter input resistance 8 Apply voltage to object under test and measure current Supply voltage from external power source (voltage input terminal on the rear panel) 1kΩ Current input terminal (front):
Mechanical + Control Mechanical Data Output from various sensors such as strain gauges, vibration pickups and pressure sensors Various MEMORY HiCORDER Input Units Analog Outputs (-5 to +5 V) MEMORY HiCORDER Logic Outputs Output of acquired CAN (0/5 V) data after D/A conversion or Your existing data logger or other recorder 8910 CAN ADAPTER RS-232C RS-232C CAN Setup Function (Supplemental Function for MEMORY HiCORDERs) By connecting a Model 8841, 8842 or 8826 MEMORY HiCORDER to the 8910 CAN ADAPTER via RS-232C, the output channel and other settings can be made simply from the MEMORY HiCORDER screen.
IEEE STD 488-1978-All INPUTS/OUTPUTS parameters except AC power on/off All connectors are type BNC unless otherwise stated Operating Temperature:
DFU3750100 Rev 3 + – – + black wire 12V 1.2 Ahr battery red wire 2 of 4 SUPPLY OUTPUTS Dependent on the position of link PLK2 and the status of the BF375M's two inputs, the control relay switches the nominal 24V to the normally closed (N.C.) or normally open (N.O.) outputs, as described in the table below:RELAY NOT ACTIVE LINK PLK2 POSITION RELAY ACTIVE N.C.
8/7/2012 Audio-Navigation Unit Connector for Inputs and Outputs (with navigation) (Except KX) AUDIO-NAVIGATION UNIT CONNECTOR A (24P) Audio-Navigation Unit Connector A (24P) Cavity Wire Color Terminal Name A1 BLK GND A2 Not Used Not Used A3 RED B_BACK_UP A4 Not Used Not Used A5 BLU RL_PRE A6 PNK RL_PRE * SH_RL_PRE A7 GRY Description Ground for audio-navigation unit (G503) ― Continuous power source ― Outputs sound signal for left rear door speaker Outputs sound signal for left rear door speaker Shield for terminals No.