PDF Archive search engine
Last database update: 13 May at 10:20 - Around 76000 files indexed.
Strut (damper)  Lower strut flange (shark fin) [A] Brake line flange [B] Strut screw (pinch bolt)  Strut screw nut  Jounce bumper [4a] Dust shield [4b] Dust shield skirt retainer [4c] Lower spring isolator  Coil spring  Upper spring isolator  Bearing seat  Upper strut clip  Strut rod nut  Dust cap  Each component is serviced by removing the strut assembly from the vehicle and disassembling it.
Be extremely careful NOT to short the battery with your tools while removing the negative cable.
Starting on the Driver’s Side, remove headlight cover by first removing one T-25 Torx screw and two T-40 Torx Screws holding cover in place.
plant sushi Choose from our selection of conveniently packed Plant Sushi cartridges, containing plants specialised in removing specific VOCs.
lights (as pictured) Air Dam Plate Bumper Frame Cover AIR DAM PLATE - Remove air dam panel by removing retainer clips as shown below.
Removing Ground Cable Courtesy of AMERICAN HONDA MOTOR CO., INC.
Unplug all connectors before completely removing the SMPS/AMP module.