Search


PDF Archive search engine
Last database update: 13 May at 01:56 - Around 76000 files indexed.


Show results per page

Results for «shear»:


Total: 60 results - 0.064 seconds

AS70 WindShear 100%

METEOROLOGIA Il wind shear di Marco Tadini Semplificando la prevista classificazione3, possiamo identificare un wind shear verticale, definito come la variazione del vento con l’altezza, quale sarebbe misurata da due anemometri posti in verticale ad altezze differenti (per esempio su di una torre), e un wind shear orizzontale, dato invece dalla variazione che misurerebbero i due anemometri se fossero posti in punti differenti ma alla medesima quota (per esempio lungo una pista).

https://www.pdf-archive.com/2011/10/10/as70-windshear/

10/10/2011 www.pdf-archive.com

Mat Final Equations adapted 93%

Chapter 5 Usage Notes Diffusion Flux Steady-State Diffusion Nonsteady-State Diffusion Constant Surface Composition Chapter 6 Temperature Dependence of diffusion coefficient Usage Engineering Stress Engineering Strain Shear Stress Hooke's Law - Stress and strain Relation Shear Modulus - Shear stress &

https://www.pdf-archive.com/2012/12/10/mat-final-equations-adapted/

10/12/2012 www.pdf-archive.com

QC11K-NC Hydraulic Guillotine Shearing Machine-E21S system 90%

The design of the guillotine shear and cutter machine conforms to EU international standards.

https://www.pdf-archive.com/2017/10/16/qc11k-nc-hydraulic-guillotine-shearing-machine-e21s-system/

16/10/2017 www.pdf-archive.com

shredder calculations 89%

3.6 Calculations 3.6.1 Calculating Torque, shear force and diameter of the shaft The free body diagram of the shaft of shredder is shown below.

https://www.pdf-archive.com/2018/05/01/shredder-calculations/

01/05/2018 www.pdf-archive.com

butterfly garden guide easy 87%

Smooth Aster If over time the plant becomes lanky by late summer, try cutting back 1/3 mid – late spring, shear moderately hard as bloom starts to finish to control reseeding.

https://www.pdf-archive.com/2016/05/17/butterfly-garden-guide-easy/

16/05/2016 www.pdf-archive.com

Simulation report Paints 84%

34 RPM 4 5 Liquid Viscosity Shear rate, 1/s Shear stress, Pa Actual Viscosity, Pa-s Predicted viscosity, Pa-s 0.0157 3.69 235 249.77 0.0246 4.63 188 186.54 Power law fluid 0.0386 5.52 143 139.18 0.0606 6.46 107 103.82 𝜇 = 𝐾 𝛾 𝑛−1 0.0951 7.5 78.9 77.46 0.149 8.68 58.2 57.85 0.234 10 42.9 43.14 0.367 11.6 31.7 32.20 0.576 13.6 23.6 24.02 0.904 15.8 17.5 17.92 1.42 18.5 13.1 13.36 2.23 21.9 9.83 9.96 3.49 25.9 7.43 7.45 5.48 30.8 5.63 5.55 8.59 36.8 4.29 4.15 K = 16.783 n = 0.35 where, K – consistency index n – flow behavior index 𝛾 – shear rate (1/s) 𝜇 – viscosity (Pa-s) Velocity distribution • • • Velocity near the impeller is high but it quickly decreases as we move away from the impeller The bottom hydrofoil impeller shows radial profile and has formed it’s own circulation loop The average velocity in the vessel is 0.49 m/s 7

https://www.pdf-archive.com/2017/09/22/simulation-report-paints/

22/09/2017 www.pdf-archive.com

Wing Structural Technical Paper 1 81%

Lemonds – Page 1 P τ M T = = = = Force (lbf) Shear (lbf) Moment (lbf-ft) Torque (lbf-ft) Materials Properties ρ = Material Density (lbm/in3) E = Material Elastic Modulus (lbf/in2) σtu = Material Ultimate Tensile Strength (lbf/in2) σty = Material Tension Yield Strength (lbf/in2) σcy = Material Compression Yield Strength (lbf/in2) σsu = Material Ultimate Shear Strength (lbf/in2) I.

https://www.pdf-archive.com/2014/12/31/wing-structural-technical-paper-1/

31/12/2014 www.pdf-archive.com

final draft 79%

McCann (1995) took this idea and applied it to a 3D form showing that CSI can be diagnosed in a region of negative EPV (EPV<0) that tends to form in a saturated environment within which the vertical wind shear is strong and convective stability is weak.

https://www.pdf-archive.com/2015/12/14/final-draft/

14/12/2015 www.pdf-archive.com

The Manufacturing Process 77%

high shear mill may over-mill or result in an over production of fine particles.

https://www.pdf-archive.com/2016/08/26/the-manufacturing-process/

26/08/2016 www.pdf-archive.com

Mathcad - Lab7 - Derivation 71%

h ho x a F1 F2 L Find MOR Solving Reactions F1 , F2 Sum of moments about roller connection therefore F1 ⋅ L = F⋅ a Sum of forces in the y direction F⋅ a therefore + F2 − F = 0 L F⋅ a Fa = L F⋅ a a F2 = F − = F⋅  1 −  L L   Shear (Top) and Moment Diagram (Bottom) Fa/L (Fa(L-a)/L) Moment is simply integral of Shear M peak = F⋅ a L ⋅ ( L − a) F(1-a/L) Now Solve M(x), moment as a function of x M 1 ( x) = m⋅ x + b Note, b here is the intercept b =0 m= M 1 ( x) = F⋅ a L F⋅ a L FOR 0 <

https://www.pdf-archive.com/2014/05/31/mathcad-lab7-derivation/

31/05/2014 www.pdf-archive.com

Project 2 TMJ TJR Group 4 63%

The TMJ is subjected to primarily compressive and also shear loads under cyclic loading.

https://www.pdf-archive.com/2016/03/27/project-2-tmj-tjr-group-4/

26/03/2016 www.pdf-archive.com

CTC-Microfluidic-Chip Amir Shahein Loic Chaubet 62%

were able to design their microchannel network to have constant flow and distribution of oxygen and nutrients, as well as similar shear stress properties and pressure drop levels to native tissue.

https://www.pdf-archive.com/2018/04/09/ctc-microfluidic-chip-amir-shahein-loic-chaubet/

09/04/2018 www.pdf-archive.com

SESSIONS RSNA2015 62%

To investigate whether lesion stiffness measured by shear-wave elastography (SWE) could predict histologic upgrade of ductal carcinoma in situ (DCIS) confirmed by ultrasound (US)-guided core needle biopsy (CNB).

https://www.pdf-archive.com/2015/11/30/sessions-rsna2015/

29/11/2015 www.pdf-archive.com

XJR-1200-1300-Stud-removal2011 60%

XJR 1200 1300 Stud removal &

https://www.pdf-archive.com/2013/03/10/xjr-1200-1300-stud-removal2011/

10/03/2013 www.pdf-archive.com

Unitrade Hardware Distributers Rev2 Email-min.compressed 60%

REEL QH0201 -30MT QH1926 -50MTX12MM TRIGGER SPRAY PLASTIC QH0060 -1L QH0061 -5L Pruning Shear QH2037 QH2038 Shovel Round Mouth QH0267 QH0269 -3KG P402 QH0270 -2.5KG P402 Sickle QH0414 16” QH0415 14” QH1928 -20MTX12MM Garden scissor QH2041 QH0027 Flat Spade QH0265 Pick Head 3kg HOSE PIPE WITH FITTINGS 3 COLOURS Gardening &

https://www.pdf-archive.com/2016/11/03/unitrade-hardware-distributers-rev2-email-min-compressed/

03/11/2016 www.pdf-archive.com

SB-4UK 60%

Ideal for operation on the latest shear bolt cable connectors &

https://www.pdf-archive.com/2017/12/07/sb-4uk-1/

07/12/2017 www.pdf-archive.com

TDS - Super Red Grease (1) 59%

Super Red EP 2 Grease contains high performance extreme pressure additives, low shear tacki ers, with rust and oxidation inhibitors that provide excellent wear protection.

https://www.pdf-archive.com/2017/01/12/tds-super-red-grease-1/

12/01/2017 www.pdf-archive.com

God OV 58%

My  dissatisfaction  with  religion  is  the  shear  simplicity  and  easily   questionable  explanation  of  the  reality  of  God.

https://www.pdf-archive.com/2011/11/09/god-ov/

09/11/2011 www.pdf-archive.com

FF1 58%

No seismic retrofitting other than shear walls or foundation bolting or does work constituting more than 20% of total operations.

https://www.pdf-archive.com/2016/03/29/ff1/

29/03/2016 www.pdf-archive.com

RivoBrochureEN 58%

Montage materials  foam, screws, shear blocks etc.

https://www.pdf-archive.com/2013/12/26/rivobrochureen/

26/12/2013 www.pdf-archive.com