PDF Archive search engine
Last database update: 25 March at 15:14 - Around 230000 files indexed.
Results for «surfaces»:
Total: 2000 results - 0.011 seconds
Surface Characteristics of Aspheric Lenses Abstract:
Lamour JCE 2010 99%
An accurate characterization of surfaces is required in a wide range of research fields, such as surface chemistry and biomaterials (1).
Once you've mastered the techniques, you'll also explore multiple surfaces as a base for your designs – wood, fabric, paper, canvas, and book forms.
It was revealed that stationary breaking of micro and macro geometry of grinding surfaces basically occurs in the areas of input of grinding disk in contact with machined surface and output from it and in the areas of configuration changes of machined surface.
For this, choosing surface protection film is not a wrong decision to make as they play a pivotal role in ensuring durable life and toughness to the surfaces.
2231-1963 ROUGH SURFACE ESTIMATION FOR SUBSURFACE IMAGING Esin Karpat Department of Electronics Engineering, Uludag University, Bursa, Turkey ABSTRACT In this paper a distance measurement based reflection point terrain estimation method (RPTEM) for characterizing two-dimensional (2-D) rough surfaces is presented.
Handheld devices including Magnetic inspection yokes bring easy outdoor inspections of metal surfaces - Now, magnet powders (small particles) are applied in the surface - They will be immediately attracted to the area in which magnetic flux leakage occurs.
C., Canada V6T1Z4 c CEA-Saclay, Service de Physique et Chimie des Surfaces et Interfaces, 91191 Gif-sur- Yvette, France d Université Paris Descartes, Génétique Moléculaire et Défense antivirale, FRE3235, 45 rue des Saints-Pères, 75006 Paris, France e CNRS, Lab Photon &
lamour JBMR A 2011 Interplay between long- and short-range interactions drives neuritogenesis on stiff surfaces Guillaume Lamour,1* Sylvie Soue`s,2 Ahmed Hamraoui1,3 1 Universite´ Paris Descartes, UFR Biome´dicale, 45 rue des Saints-Pe`res, 75006 Paris, France Universite´ Paris Descartes, Re´gulation de la Transcription et Maladies Ge´ne´tiques, FRE3235, 45 rue des Saints-Pe`res, 75006 Paris, France 3 CEA Saclay, Service de Physique et Chimie des Surfaces et Interfaces, 91191 Gif-sur-Yvette, France 2 Received 24 March 2011;
chapII mdf 95%
Dans les deux cas il n’y a pas de forces de frottement dans le fluide (pas d’effets de viscosité), toutes les forces qui se développent sur les surfaces sont dues à la pression.
As far as the surface is natural then there would not be any issues but most of the man made surfaces are prone to damages and scratches.
Incorrect preparation of bonding surfaces is usually the cause of the bond failure.
B Branding Techniques Engraving on leather products Engraving on plastic products 360 -degree rotary engraving LASER ENGRAVING (Eng) Our machines oﬀer engraving on not only ﬂat hard surfaces but also on round surfaces from only a few degrees up to full 360 degree engraving.
firstname.lastname@example.org 1 Designing Freeform Origami Tessellations by Generalizing Resch’s Patterns In this research, we study a method to produce families of origami tessellations from given polyhedral surfaces.
Floor polishing solutions Decorative surfaces are known as polish concrete.
22311963 THE ANALYSIS OF THE JOINT CHARACTERISTICS, BASED ON THE PROCESSING METHODS OF THE CONTACTING SURFACES Huseynov G.A, Bagirov S.A Azerbaijan Technical University, Baku c.
Sometimes, tiny and soft bits are distanced by rubbing two surfaces of the same material together.