PDF Archive search engine
Last database update: 17 May at 11:24 - Around 76000 files indexed.

Show results per page

Results for «tensile»:

Total: 41 results - 0.018 seconds

Assignment2 100%

Problem Show the relationship between the weight percent zinc and the tensile strength in ksi.


CRA 2550E Data Sheet 92%

STANDARD STRENGTH CLASSIFICATIONS Yield Strength Yield Strength Tensile Strength min.


pcwirestrand 90%

Plain PC Wire Plain PC Wire, also called plain surface PC steel wire or smooth PC wire, features low relaxation and high tensile strength, ideal for concrete structures.


Premium Tableware 88%

Tensile Group Enterprises Mobile Number:


astm-a633-a633m 87%

N Grade Chemical composition % A633GR C A ≤0.18 Si Mn P S Mo 0.15-0.50 1.00-1.35 ≤0.035 ≤0.04 - Ni - Mechanical properties Grade Yield Strength Tensile Strength Elongation in 2 in.


astm-a533-a533m 86%

Tension tests shall be performed wherein the steel specimens shall conform to the required values of tensile strength, yield strength, and elongation.ASTM A533/A533M standard main steel grade:A533 GRADE A, B, C, D, CLASS 1, 2, 3 EMAIL:


Resume 83%

Yusuke Fushiwaki     (May-July, 2013) Analyzed the influence of Silicon and Manganese content in base steel on the quality of zinc coating on galvanized and galvannealed steel This involved testing the steel samples for segregation, mechanical properties and corrosion resistance The steel samples were thus characterized by Tensile test, Bend test, X-ray diffraction, X-ray Photoelectron Spectroscopy Glow Discharge Spectroscopy, SEM analysis, TEM analysis and Salt Spray Test Influence of pre-strain in base steel sample, on the galvanizibility of steel was also analyzed, with respect to wetting during hot-dipping method Current Research Project Preparation of Magnesium Oxide/Oxide Nano-Composites by Solid State Precipitation route (Jan, 2014 - )     MgO nano-powder from Magnesium Nitrate (MgNO3.6H20) precursor was prepared via Hydrothermal method route The powder was combined with Fe-oxide powder and subjected to sintering and aging for different sintering temperatures and aging durations respectively The incorporation of Fe-oxides improved the mechanical properties over MgO powder (without Fe-oxide) considerably (especially Vicker Hardness) The influence of Fe-Oxides on other properties of MgO (like wear resistance) is being studied Major Projects 1.


Balls List BPL 2011 Patch 2.0 79%

Balls List BPL 2011 Patch 2.0 Nike T90 Seitiro EPL Nike T90 Tracer EPL Nike Seitiro EPL Hi-Vis Nike T90 Strike EPL Black Nike T90 Ascente EPL Mitre Tensile Power Championship Mitre Tensile Scottish Premier League Nike T90 Seitiro LFP Nike T90 Seitiro LFP Hi-Vis Nike T90 Strike LFP Black Nike T90 Seitiro Serie A Nike T90 Seitiro Serie A Hi-Vis Nike T90 Strike Serie A Black Adidas Torfabrik Bundesliga 2012 Adidas Torfabrik Bundesliga 2011 Red Puma Ligue 1 2012 Season UEFA Champions League Finale London Adidas Capitano ChelseaFC(Extra Ball) Adidas Capitano Liverpool FC (Extra Ball) Adidas Speedcell Glider Black (Extra Ball) Adidas SpeedcellGliderYellow (Extra Ball) Adidas Speedcell Sala 5x5Orange (Extra Ball) Adidas UEFA Europa League 2012 Adidas UEFA Super Cup Monaco UEFA Champions League FinaleLondon Ball UEFA Champions League Finale Red Nike T90 Tracer Copa Libertadores 2011 Konami PES 2012 Official Ball Chelsea FC Blue Ball UEFA Euro 2012 Ball Adidas Jabulani World Cup 2010 Umbro Dynamis FA Cup Final Nike Tracer Doma Copa America 2011 Nike Tracer AFC Asian Cup 2011 Adidas UEFA Super Cup Monaco 2010 (in Exhibition) Nike T90 Tracer Copa Libertadores (in Exhibition) Adidas Champions League Finale London 2011 (in Exhibition)


Materials 79%



Materials 79%



pla nx2 datasheet 79%

Available Sizes Diameter 1 ,75 2,85 1 ,75 2,85 Specific weight 1,3 g/cm3 1,3 g/cm3 1,3 g/cm3 1,3 g/cm3 Weight 1 500 g 1 500 g 3500 g 3500 g Net weight 1 1 00g 1 1 00g 2500g 2500g Technical Support Properties Tensile Strength Tensile Elongation Flexural Modulus Flexural Strength 3,5% Izod Impact Strength VICAT A (VST) MFR Melting Temperature Test Method ISO 527 ISO 527 ISO 527 ISO 178 ISO 178 ISO 306 ISO 1133 ISO 3146-C Unit Mpa % MPa MPa ft-lb/in (J/m) °C g/10 min °C Copyright 2017 extrudr, all rights reserved Höchsterstrasse 81 , 6972 Fussach, Austria.


AQA-PROD3-MarkScheme-2012 79%

Product Design – PROD3 – June 2012 Question Part 1 01 Sub Part Marking Guidance Mark Comments Destructive testing 2 from:hardness, tensile strength, toughness, ductility/malleability 2x6 marks Low:


2013 panwar jbiolchem 77%

Methods used include scanning electron microscopy, protein electrophoresis, atomic force microscopy, and tensile strength testing.


Rescue Positioning Device (RPD) Product Information Sheet 71%

9mm diameter, Minimum tensile strength - 2540kg, polyester cover, braided over a nylon core, low stretch, torque-balance.


UNIO FTTH fig8 1x(1-12) 62%

4.φ1.2mmsteel 1.special low-bend-sensitivity optical fiber 2.simple structure ,ligth weigth 4.characteristics 7.0 2.FRP strength 0.4 1.ribbon 3.two parallel FRP ensure optical fiber 1.7 4.novel flute design,easy strip and splice,simple installation and maintenance 3.out sheath 4.6 5.low smoking zero halogn sheath unit:mm 2.2 GJXFDCH-12B6 cross 2.2mm×7.0mm 5.cable size 6.attnuation wavelength B6a,G.657A B6b,G.657B 1310nm ≤0.40dB/km ≤0.50dB/km 1550nm ≤0.30dB/km ≤0.40dB/km type core FTTHfig8 12.jan 7.machine parameters OF.type allow tensile long/short term(N) allow crush resistance long/short term(N) bendling radus static/dynamic B6a 300/600 1000/2200 30/60 B6b 300/600 1000/2200 20/40 8.temperature storage/operating temperature:-20, ~ +60c length standard length:500m,1000m,2000m.other lengths avaliable on request


B037106014 62%

Total joint contact force is compressive and tensile for respective stance phase and swing phase of human walking gait cycle.


Wing Structural Technical Paper 1 60%

It sizes structure cognizant of tensile yield, compression yield, compression buckling of the skins and compression buckling limitations of integrally stiffened wing covers.


O.ST.IA.0037-00 60%

Caratteristiche Melt mass-flow rates (MFR) 230°C/2,16kg Melt mass-flow rates (MFR) 230°C/5kg Density, 23°C Tensile stress at yield Tensile strain at yield Modulus of elasticity in tension Modulus of elasticity in flexure Charpy impact strength of notched specimen Vicat softening temperature (VST) Shore D hardness Norme Unità Valore ISO 1133 g/10 min 5,2 ISO 1133 g/10 min 22 ISO 1163 ISO 527-1,2 ISO 527-1,2 ISO 527-1,2 ISO 178 Kg/m3 MPa % MPa MPa 903 31 10 1400 1400 ISO 179 KJ/m2 5 ISO 306 ISO 868 °C - 154 67 This document is property of OPTOTEC S.p.A., all rights reserved MD.Q.4200-00 23.01.2001 File:



• Lightweight metal free technology, exclusive to TERRA • Combines super-weaved, high tensile fabric and resilient polymer compounds • Puncture resistant plate increases surface coverage, and remmains flexible vs.



This process enables steel manufacturers to produce light-weight but high tensile steel sheets.


3dpanel 57%

SAE 1006-At least 650 N/mm2 tensile strength.


Rotary Drilling Hose 55%

Reinforcement is made from multiple layers of high tensile steel wire, cords, wound and middle rubber layer.


AQA-SYST3-QuestionPaper-2011 54%

    tensile strength across a range of metals hardness across a range of metals electrical resistance across a range of metals resistance to corrosion across a range of metals.


Navaneet Ramabadran Resume 54%

aerospace Fabricated ZnO nanowires from nanoparticle solution for carbon fiber strengthening and high temperature piezoelectric gas sensors Collaborated on a variety piezoelectric gas sensor designs for cyclic voltammetry in high temperature conditions Coated graphene thin-film on silicon with electrophoretic deposition and created graphene-epoxy composite with epoxy residue Performed tensile strength and thermal testing for graphene sample and SEM imaging for graphene samples and ZnO samples Microfluidics Engineer/Intern - Materials Research Lab ( Santa Barbara, CA ) • Fabricated MoS2/WS2 semiconductor monolayers for Li-Ion batteries, transistors, optoelectronics, solar cells, gas sensors and catalysis • Improved Photoluminescence and Raman peak count with careful study of Chemical Vapor Deposition (CVD) growth parameters • Studied the CVD nucleation and growth of Volmer-Weber monolayer films of MoS2, WS2 and graphene for p-type transistors Battery Engineering Summer Intern - National Science Foundation ( El Paso, TX ) Executed Design of Experiments (DOEs) for new cells and materials, overseeing cell builds, and evaluating cell test results Selection, characterization, and validation of lithium-ion cell materials and components Statistical data analysis for electrode &


1610l V3.0 2012 - Metric 54%

No compressed air required Construction High tensile 35ksi low silicon grey cast iron (Meehanite Type) - Exceeds SAE G3000 standards.