PDF Archive search engine
Last database update: 09 May at 07:19 - Around 76000 files indexed.

Show results per page

Results for «tests»:

Total: 4000 results - 0.077 seconds


Report No.:


HIOKI 3153 ENG 99%

(DC voltage withstand, insulation resistance tests) Store up to 10 sets of test conditions for voltage withstand and insulation resistance modes, so you can quickly switch among the test conditions.


GUI Path oriented Test generation algorithms paper 99%

We also check the results of the tests through comparing the output results with event tables generated from the specification.


ucit20101110 99%

The tests are derived from both the structure of the software and its formal specification in the Z formal language.


genetic algorithms paper 98%

The tests are derived from both the structure of the software and its formal specification in the Z formal language.

08/09/2011 98%

We choose the option of automating the GUI testing when tests are repeated several times [13].


npb in english russian federation firefighting rules and regulations 98%

The order of statement of fire extinguishers on production and realizations of certified tests NPB 157-99* in English - Special clothing for fire-fighter.


UN38.3 # P29136158HV # TCT141110B019 - 2015-04-05 98%

Forced discharge Crush Ⅳ、TEST METHOD Tests T.1 to T.5 shall be conducted in sequence on the same cell or battery.


technical 98%

THE SAFETY TESTER IS THE GENERIC TERM TO COVER THE 3 OR 8 TESTS OF THE ELECTRICAL SAFETY STANDARDS, FROM THE INTERNATIONAL STANDARDS ground bond test (also called bonding test, ground continuity test ) insulation test (also called high resistance test, megger test) hipot test to make a high voltage test (also called dielectric strength test, hipot test, hi-pot test, breakdown test or flash test) leakage current measurement (also called line leakage test) 4 in 1 ELECTRICAL SAFETY COMPLIANCE ANALYZER (AC/DC/IR/GB) AN9638H(F)/AN9637H(F), AC Hipot test/DC Hipot test/Insulation Resistance test/Ground Bond test Latest international standard:Comply with CCC,IEC,EN,VDE,BS,UL,JIS standard requirements,500VA WITHSTAND(AC 5KV/100mA),short-circuitoutput current exceeds 200mA,Ground resistance test current up to 64A,optional resistance or voltage mode.7 kinds of built-innetworking MD card for leakage contace current test,complying with multiple industrial standards.


HIOKI 3174 ENG 98%

● Eliminate the effects of supply voltage fluctuations ● Delay timer function 3 Safe, Automated Operation Convenient Safe ● Continuous full-auto withstanding voltage and insulation resistance testing The 3174 lets you set independent test conditions including test voltage for withstanding voltage and insulation resistance testing, and you can perform these tests continuously.


# B25181 # TCT150424B004 - UN38.3 - 2015-05-07 unlocked 98%

86-755-27673332 Page 2 of 18 第 2 页共 18 页 Lithium Battery UN38.3 Test Report Ⅳ、Test Method and Requirement 测试方法和要求 Tests T.1 to T.5 shall be conducted in sequence on the same cell or battery.


automated motor testing 98%

no-load, signature and load tests.

28/03/2016 98%

Users are required to perform the initial tests;


HIOKI FA1282 ENG 97%

1μ / 10μ / 100μ A peak (3 ranges) General Specifications Power supply 0.1 to 2.5 (mm) 100 steps/second (*0.15 mm movements, 4-arm simultaneous probing, capacitance measurement) Resistance Capacitance Inductance Diode VZ measurement Insulation measurement Capacitor insulation measurement High-voltage resistance measurement High-voltage short measurement Leak current measurement Tests Zener diode VZ measurement • Measurement ranges Digital transistor measurement Photocoupler measurement Continuity measurement Open measurement Short measurement DC voltage measurement Discharge function Simple visual presence test Simple visual alignment measurement DC constant voltage DC measurement mode DC constant voltage Insulation measurement mode DC constant current DC measurement mode DC constant current Insulation measurement mode AC constant voltage DC voltmeter DC measurement mode Test signals DC voltmeter Insulation measurement mode DC ammeter DC measurement mode DC ammeter Insulation measurement mode AC ammeter :



Apr.12, 2016 Date(s) of performance of tests ...................................