PDF Archive search engine
Last database update: 07 April at 20:58 - Around 220000 files indexed.
Results for «wavelength»:
Total: 80 results - 0.043 seconds
dual wavelength 650nm 980nm1695 dual wavelength 650nm 980nm Dual Wavelength 650nm &
Lipo Laser 91%
MACHINE WAVELENGTH AND POWER There are certain factors associated with this procedure that is important to note.
Example 1 Alumina on glass slide MProbe Vis system (400-1000nm wavelength range) was used for this measurement.
AT 30T 940nm Tactical Series DATASHEET AT-30T, 940nm Tactical Series IR Illuminator Data Sheet Completely Invisible • 940nm wavelength with absolutely no red glow Low Voltage • 12V DC power input Day/Night Switch • Automatically turns the illuminator ON/OFF Supplied with U-bracket • Other mounting options are available Made in the USA • All illuminators designed and built in Salt Lake City, UT, USA Lifetime Warranty with Advanced Replacement • We value your trust, that’s why all products are covered by a lifetime warranty with advanced replacement illumination distance TECHNICAL SPECIFICATIONS Wavelength:
Poe Switch 83%
Poe Switch RASPFiber Fiber Optic Network Switch RASP-MG1500-20-SC-A Managed gigabit switches, 1 fiber SC port, 5 UTP ports, TX1550nm/RX1310nm, single fiber, single mode 20KM 5-Port 10/100/1000Mbps management gigabit ethernet ports 1 Port 1.25G fiber single mode SC connector Distance 20 Km Wavelength 1550nm/1310nm Supports Port-Based and 802.1Q VLAN function, up to 64 VLAN groups Easy-to Use graphical user interface RASP-MG1500-20-SC-B Managed gigabit switches, 1 fiber SC port, 5 UTP ports, TX1550nm/RX1310nm, single fiber, single mode 20KM 5-Port 10/100/1000Mbps management gigabit ethernet ports 1 Port 1.25G fiber single mode SC connector Distance 20 Km Wavelength 1310nm/1550nm Supports Port-Based and 802.1Q VLAN function, up to 64 VLAN groups Easy-to Use graphical user
2321-0869 (O) 2454-4698 (P), Volume-7, Issue-4, April 2017 Performance Analysis of Wavelength Division Multiplexed Passive Optical Network (WDM-PON) with implementation of DCF Abhishek Gupta terminal are shared by all ONUs on the network to lessen the transceiver count and 2) the fast tunable lasers not only produce downstream data traffic but also offer DWDM-PON ONUs with optical CW bursts for their upstream data broadcast.
MProbeHR-MSP systems (700-1100nm wavelength range) is well suited for this application for following reasons:
It is also important to understand how the materials to be engraved absorbs laser light at the wavelength of the laser chosen.
In either situation, there can be contention when two or more bursts arrive concurrently in two varied wavelengths and requests for the same outgoing wavelength.
The Alexandrite laser produces a specific wavelength of light and is considered a red light laser.
The cut-off wavelength of the photodiode is given by lc = 1240 where Eg lc is the cut - off wavelength (nm) E gis the bandgap energy (eV) Photodiodes are mostly constructed using silicon, germanium, indium gallium arsenide (InGaAs), lead sulphide (Pbs) and mercury cadmium telluride (HgCdTe).
HIOKI 3664 ENG 76%
Four Sensors to Accommodate All Types of Testing Needs Choose from 4 different optical sensors according to wavelength and sensor structure to aptly meet your application requirements.
This is an entry-level desktop CO2 wavelength laser engraver and cutter capable of cutting/engraving many materials such as paper, 1/4"
Ultraviolet germicidal irradiation (UVGI) is a disinfection method that uses short-wavelength ultraviolet (UV-C) light to kill or inactivate microorganisms.
Ultraviolet emission is divided straight into small wavelength UVB the radiation (Two hundred and ninety in order to 315 Nanometers) and lengthy wavelength UVA radiation (315 to 380 nanometers).
Millimeter wave generally corresponds to the radio spectrum ranges 30 GHz to 300 GHz, with wavelength between one and ten millimeters.
Assuming long wavelength approximation, the velocity components and stresses on the wall are calculated up to order in and the behaviour of the axial and transverse velocities as well as the stresses is discussed for different variation in the governing parameters.
Ruby Laser * Primary laser introduced with regard to hair removal * Laser is well soaked up by melanin pigment throughout hair, making it best for removing finer, lighter in weight hair * Must be used for locks removal on sufferers with fair skin color, as it may burn those that have dark or tan skin * Slow repetition rate along with relatively small place size, which may mean an extended, more expensive treatment with greater irritation Alexandrite Laser * The actual fastest hair eradication laser * Significant spot size (up to help 18mm) and high repetition rate * Can easily treat large body areas - a full back can be treated inside of 30 minutes * Ideal for patients with good to olive complexions Diode Laserlight * Longer wavelength enables deep penetration in to the skin and protection for darker skin color types * Not really effective for lighter and finer hair * Smaller location size, which brings about longer treatment time period * The extended treatment time necessary for diode laser treatment may result with greater expense as well as increased discomfort * The TRIA Beauty home laser treatment system is a new diode laser Nd:
Fluorescent lights are primarily employed because the plant does not require high quality low 1|Page wavelength red light present in high pressure sodium lights, and it does not require the quantity of light or the heat emitted by metal halide bulbs.