TESA Training Catalogue descriptive 2015 (PDF)

TESA Group
Rue du Bugnon 38
1020 Renens, Switzerland
T: +41 21 633 16 00 F: +41 21 633 17 57

TESA TRAINING
CATALOGUE
2015

www.hexagonmetrology.com
www.tesagroup.com

TRAINING ON CLASSICAL INSTRUMENTS
MARKETING
P58-1504 - Metrology Base
English

For
Description

Purpose

½ day

Session 1

Session 2



-

Session 3

Prerequisites
None

Sellers, Technical Sellers
Introduction to metrology and measuring principles.
Starting with definition and vocabulary to use of common hand tools like micrometer,
caliper, internal micrometer, comparative measurement.
Basic knowledge of metrology

P18-1503 - TESA Hand Tools
Session 1
English

For
Description

Purpose

Session 2

Session 3

½ day

Prerequisites
None

Sellers
Marketing and application of all TESA Handtools.
Includes key points, principle and hands-on user experience of TESA Classics, Imicro,
Micromaster, IP67 Caliper, Digico.
Key elements for TESA products.

APPLICATION
P16-1502 - Angle & Flatness Measurement
Session 1
English

½ day

-

Session 2

Session 3

Prerequisites
None

Sellers, Technical Sellers
For
Description

Purpose

2

Definition of angle and flatness. How to choose the instrument that fits a set requirement.
How to measure angles and flatness, with or without computer software.
Merge application and instrument for customer's perfect solution.

P16-1507 - Inductive Probes
Session 1
English

For
Description

Purpose

1 day

Session 2

Session 3



Prerequisites
None

Sellers and Technical Sellers
Inductive probe measuring system, components, key points, mutligauging solution. Product
selection according to market range and customer’s needs. Electronic interface and probe
compatibility.
Software application StatExpress and probe utilities. TIS / TSIP / Data-Direct
LVDT or HB? Vacuum or pneumatic? USB and Wireless probes?
Which product is required to fit on complete measuring system.

P16-1509 - Height Gauges Marketing and Basic Application
Session 1
English

For
Description

Contents

Purpose

3

1 day



Session 2

Session 3

Prerequisites
None

Sellers, Technical Sellers
This course will focus on:
1) A marketing presentation giving all the needed arguments for selling all TESA
Height Gauges versus main competitors and
2) A practical training for basic use and standard demonstrations.
1. General presentation of TESA Height Gauges
1.1
TESA Height Gauges:
History and knowhow, Available models, Ranges, Functions, Accuracy,
Accessories
1.2
Main competitors overview:
Mitutoyo, Mahr, Trimos.
1.3
Marketing comparison:
Positioning, TESA Height Gauges unique features, Comparison between
products
1.4
Sales documentation:
User manuals, product Infos, Pictures, Sales presentations, TESA portal,
Service manuals
2. Basic practical training on TESA Height Gauges
2.1
TESA Hite Magna and TESA Hite main functionalities
2.2
Micro Hite manual main functionalities
2.3
µ-Hite main functionalities
2.4
Micro Hite+M and TESA Hite+M main functionalities
3. TESA Height Gauges assembly cell visit
Knowledge of the complete TESA HG range and their specific features, how to position the
TESA products against competitors, knowledge of the unique TESA HG features and selling
proposition, how to measure standard parts with the basic functions

P18-1505 - Comparative Measuring Instruments
Session 1
English

For
Description
Purpose

Session 2

Session 3



½ day

Prerequisites
None

Sellers, Technical Sellers
Description of comparative measuring principle, instrument, setting and accuracy. How to
use Veribor, TPS setting bench.
Get the feeling for fast and accurate measurement by comparison.

P18-1506 - TESA LINK
Session 1
English

For
Description

Purpose

Session 2

Session 3



½ day

Prerequisites
None

Sellers, Technical Sellers
Traceability is more and more requested and needs to be simple for everyone. Find the
right way to connect your TESA instrument and making a difference on the computer side.
Software solution goes from standard Windows tool to statistical analysis
Connect 1,2, 40 instruments, set and use it directly from computer true standard RS232.
DataDirect and StatExpress training. Show the classification on IP67 “PASS” “FAIL” &
“REC”

P34-1510 - Height Gauges Advanced Application
Session 1
English

For
Description

Prerequisites
Contents

4

1 day



Session 2
-

Session 3

Prerequisites

-

P16-1509 Height Gauge
Basic Application

Sellers, Technical Sellers
Our demo room will provide full access to the participant to our complete range of HG for
intense training. This course will especially train the participants to use the extensive range
of functionalities available on all the TESA HG. This hands-on training will start with the
TESA HITE MAGNA and TESA HITE HG, followed by the TESA muHite and the MICRO
HITE and finally the TESA HITE+M and the MICRO HITE+M. Features like perpendicularity,
tolerances, statistics, 2D modes and programming will be explained. The major part of the
training will take place on the motorized HG.
P16-1109
1. Introduction
2. TESA Hite magna & TESA Hite advanced application
2.1
Height Gauge configuration and initialization
2.2
Standard measurements:
3. TESA Micro Hite advanced application
3.1
Height gauge configuration and initialization
3.2
Standard measurements
4. TESA µHite advanced application
4.1
Height gauge configuration and initialization
4.2
Height measurements

5. TESA Hite +M and Micro Hite +M advanced application
5.1
Height gauge configuration and initialization
5.2
Standard measurements
5.3
Programming
5.4
1D/2D mode
5.5
Tolerances
5.6
Statistics
Complete knowledge of THmagna / THopto / muHite / MH / THM / MHM, Complete
overview of all the available features on THM and MHM, mastering the wider possible range
of TESA HG, ability to use all the available HG factory functionalities, ability to understand a
drawing and the matching HG functionalities.

Purpose

TRAINING FOR SMALL MACHINES
MARKETING
M05-1501 - Micro-Hite 3D Marketing
Session 1
English

For
Description
Contents

Purpose

Purpose

5

½ day



Session 2

Session 3

Prerequisites
None

Sellers, Technical Sellers
Descriptions of TESA tactile machines full range, market positioning, marketing advantages.
Short application training session.
1. TESA-REFLEX Concept
2. Micro-Hite 3D General Presentation
2.1 Technical Specification
2.2 Sales Program
3. Accessories
3.1 Communication Accessories
3.2 Spare Parts
4. Main competitors overview
5. Application Target for Customer
6. TESA-REFLEX Panel
4.1 History
4.2 New TESA-REFLEX Panel, New functionalities
7. Virtual machine
8. Functionalities
8.1 Homing
8.2 Probes
8.3 System Options
8.4 Scanning
8.5 Measure mode
8.6 Results
The goal is to provide the tools to be able to promote the machine as well as being able to
present the main machine functionalities during a short demonstration in proposing the best
solution for customer.
Participants will be able to:

1. Communicate the benefits of the product to compete and to highlight the simplicity of the
concept REFLEX.
2. Briefly introduce the product specifications.
3. Do a basic demonstration.

APPLICATION
M24-1508 - TESA REFLEX Vista Application
Session 1
English

For
Description

Purpose

Session 2

Session 3

Prerequisites
M06-1407 Vision 200
& 300 Marketing

¾ day

Technical Sellers, Application engineer, Service Technician
Presentation of the TESA-VISIO 200 and 300 GL MAN with a highlighting of product
characteristics and applications feasible. The second part of this course will run on a
demo machine. A description of the software TESA-REFLEX Vista (light, zoom, functions
and parameters) as well as the "Compar" mode will be performed and then participants will
have the opportunity to use the machine to perform case of applications.
Participants will be able to:
1. Communicate the benefits of the product to compete and to highlight the simplicity of the
concept REFLEX.
2. Show product specifications.
3. Educating customers about the software.
4. Handle application cases for customers.

M24-1513 - TESA REFLEX Scan Application
Session 1
English

¾ day



Session 2

Session 3

Prerequisites
M06-1412 Scan 52
Marketing

For
Description

Technical Sellers, Application engineer
Presentation of the TESA-SCAN 52 highlighting the product
characteristics and applications. The second part of this course will run on a demo machine.
A description of the software TESA-REFLEX Scan will be performed and participants will
have the opportunity to use the machine to perform application cases.

Purpose

Participants will be able to:
1. Communicate the benefits of the product and to highlight the simplicity of the REFLEX
concept.
2. Show product specifications.
3. Educate customers on the software.
4. Handle application cases for customers.

6

M25-1503 - TESA REFLEX MH3D & DUAL Application
Session 1
English

1 day

Session 2

Session 3

Prerequisites



For
Description

Technical Sellers, Application engineers
Focus on the use of the following 3D machines:
- Micro-Hite 3D (MH3D)
- Micro-Hite DUAL

Contents

1. General Presentation
1.1 Sales program and accessories
1.2 TESA-REFLEX Concept
2. TESA-REFLEX Panel
2.1 History
2.2 Presentation and new functionalities
2.3 Cabling
2.4 Software and Firmware Update
3. Functionalities
3.1 Homing
3.2 Probes
3.3 System Options
3.4 Scanning
3.5 Measure mode
3.6 Alignments
3.7 Tools box
3.8 Results
3.9 Small exam(s)

Purpose

Be able to perform programs for most customers. Manage different specificities such as
save results, adding tolerances or report generation. Be able to demonstrate the software.
Answer any questions relating to the application.

7