How Does a Metal Baler Work .pdf
Original filename: How Does a Metal Baler Work.pdf
This PDF 1.7 document has been generated by WPS Office / , and has been sent on pdf-archive.com on 16/07/2015 at 10:49, from IP address 45.63.x.x.
The current document download page has been viewed 368 times.
File size: 227 KB (4 pages).
Privacy: public file
Download original PDF file
How Does a Metal Baler Work
Key words: how does a baler work,hydraulic metal baler,metal baler,scrap
metal baler,metal baler for sale,scrap metal equipment,metal recycling
equipment,recycling metals,scrap baling machine manufacturer
Hydraulic metal baler is used to compress the scrap metal into bales with
certain size. It can be manually operated or automatically controlled. The
machine adopts hydraulic transmission to complete the baling process. The
sealing elements have excellent resistance to high pressure and high
temperature, which ensure the density of the bale. The baler adopts differential
acceleration system, which increases the baling efficiency significantly.
How Does a Hydraulic Metal Baler Work?
The working process of our metal baler is accomplished cooperatively by the
main machine, hydraulic station and electric control system. The working
principle is as follows:
Step One, Feed the Material
After the pump is started, feed a moderate amount of scrap metal into the
Step Two, First Compress
The high pressure oil enters the back cavity of the top cylinder. The piston rod
reaches out, pressing the articulated door cover into the press box and closing
it to form the compression chamber. Thus the first compress finishes. The
height of the compression chamber is the height of the metal bale.
Step Three, Second Compress
The high pressure oil enters the back cavity of the side cylinder and the piston
rod reaches out, driving the side pusher forward to press the metal in the box
till reaching the front dead center. The second compress then finishes.
Step Four, Third Compress
The high pressure oil enters the back cavity of the main cylinder and the piston
rod reaches out, driving the main pusher forward to press the metal in the box.
When reaching the preset value of pressure, hold for 3-5 seconds and finish
the final compress.
Step Five, Reset the Top Cylinder
The high pressure oil enters the front cavity of the top cylinder, lifting and
opening the door cover.
Step Six, Reset the Side Cylinder
The high pressure oil enters the front cavity of the side cylinder and the side
cylinder is reset.
Step Seven, Reset the Main Cylinder
The high pressure oil enters the front cavity of the main cylinder and the main
cylinder is reset.
Step Eight, Bale Out
The high pressure oil enters the back cavity of the flip over cylinder, driving the
turning mechanism to turn the bale out.
Step Nine, Reset the Flip Over Cylinder
Reset the flip over cylinder, and the baling process is completed. Feed the
material and begin the next baling process.
Different Bale Out Types
* Side turning: the bale turns out of the press box in 90 degree. This is the most
preferred type. The bale has clear corner angle.
* Forward pushing: After the the main pusher pushes the bale forward out of
the press box. This type is suitable for light materials.
* Side pushing: the bale is pushed out of the press box from the side. The
sliding track helps the bale move on board the truck or ship, saving labor.
Our hydraulic metal baler has the features of compact structure, easy
operation and maintenance and reliable sealing properties. We have various
available models for you to choose and also can customize for you. It is an
excellent scrap metal equipment for recycling metals.