how a heating system functions1478 .pdf
Original filename: how a heating system functions1478.pdf
This PDF 1.4 document has been generated by / iTextSharp™ 5.4.1 ©2000-2012 1T3XT BVBA (AGPL-version), and has been sent on pdf-archive.com on 24/02/2016 at 05:59, from IP address 209.59.x.x.
The current document download page has been viewed 297 times.
File size: 4 KB (2 pages).
Privacy: public file
Download original PDF file
how a heating system functions
Before we talk about how a main heater works, you should understand that central heating
systems have a primary heating home appliance which is normally found in the garage or
basement. This appliance can either be a heater or a boiler. To warm the rooms, it disperses
warmer air through a ductwork or simply sends out steam or warm water to convectors or
A main forced-air system's thermostat turns the cooling or heating on and off as the space
temperature level rises and falls. The exact same thing occurs in a gravity system. Residences
that utilize main heating systems generally utilize baseboard heating systems, convected heat, or
in-floor or in-wall gas heating units.
The most typical kind of a main heating and cooling system is a ducted system. Let's separate the
two types of ducted air system which are gravity and forced-air.
1. Forced-air system. A forced-air system has a heating system that warms the air, an air
conditioning system that cools it, or a heat pump that will either warmer or cool it. The air will then
be distributed to the spaces with the help of a blower.
2. Gravity system. When hot air naturally rises (convection currents), in gravity systems, it will
travel through the ducts and deliver the warm air to the rooms. It does not have any blower
however it does have bigger ducts. Likewise, it can just distribute warm air because cold air
A system that has a heat pump or an air conditioning unit is thought about a forced-air system.
How the cold air, which is being produced by either the a/c unit or the heat pump, is being
dispersed to your home is going to be the same as how the warmer air from a furnace is being
provided to the spaces through forced-air systems. Keep in mind that the air conditioning unit
utilizes electrical energy to cool the air through easy refrigeration process.
Heat pumps can either warm the air or cool. Throughout winter, a heat pump will extract heat from
the air outside and transfer it inside. It works the other way around if it's hot or warm. The heat
pump will remove the heat inside and transfer it outside, leaving the cold air inside the rooms.
Almost all heat pumps are run by electricity, just like a/c.
The refrigerant will move through the system and will either warmer or cool the coils that are
located inside the air handler. The cooled or warmed air will be pressed back or distributed by the
blower in the rooms through the ductwork.
If during the winter season more heat is required, the air handler, which will have electricresistance aspects, will include warmth to the air that goes through its coils sticking to the
temperature level that you desire on cold days.
A forced-air system has a heating system that warms the air, an air conditioner that cools it, or a
heat pump that will either warm or cool it. When hot air naturally rises (convection currents), in
gravity systems, it will pass through the ducts and deliver the warm air to the rooms. It can just
disperse warmer air given that cold air requires blowers.
How the cold air, which is being produced by either the air conditioner or the heat pump, is being
distributed to your living spaces is going to be the very same as how the warm air from a heater is
being provided to the rooms through forced-air systems. Keep in mind that the air conditioner
uses electrical power to cool the air through simple refrigeration process. Home Heating