This PDF 1.6 document has been generated by Adobe InDesign CS5.5_J (7.5.3) / Adobe PDF Library 9.9, and has been sent on pdf-archive.com on 25/12/2015 at 07:45, from IP address 5.18.x.x.
The current document download page has been viewed 252 times.
File size: 1.86 MB (4 pages).
Privacy: public file
IMPEDANCE ANALYZER IM7583, IM7585
Component Measuring Instruments
IM7583
Measurement
frequency
1
MHz
IM7585
High
Stability
MHz
Measurement
frequency
1
MHz
High
Speed
to 600
to
1.3
Measurement time: maximum
0.5ms
Measured value variability:
0.07%
GHz
(Analog measurement time)
(When measuring at 1GHz with the IM7585)
2
High-speed, highly stable measurement
Ideal for common mode filter and chip inductor production lines
IMPEDANCE ANALYZER
IM7583
Measurement frequency
1MHz to 600MHz
Repeatability and analog measurement time
Repeatability (Z, 3CV) [%]
0.4
0.3
(Data shown for reference)
Measurement freq.: 500MHz
Signal level: +1dBm
Device under test: 1nH
0.2
0.1
0
0.1
1
Analog measurement time [ms]
10
Perfect for R&D and production of ferrite chip beads and chip inductors
IM7585
Measurement frequency
1MHz to 1.3GHz
Repeatability and analog measurement time
0.4
Repeatability (Z, 3CV) [%]
IMPEDANCE ANALYZER
0.3
(Data shown for reference)
Measurement freq.: 1GHz
Signal level: +1dBm
Device under test: 1nH
0.2
0.1
0
0.1
1
Analog measurement time [ms]
10
3
to boost your production volume
Measurement capabilities suited to a variety of production lines
For single-frequency pass/fail judgments:
[LCR mode]
For pass/fail judgments based on frequency characteristics:
[Analyzer mode : Peak judgment]
For multiple-frequency pass/fail judgments:
[Analyzer mode : Spot judgment]
For combined LCR + analyzer testing:
[Continuous measurement mode]
Functions, Features and Small Form Factor to Enable Efficient and Intelligent Measurement and Analysis
R&D applications
• Measure frequency characteristics and level
characteristics
• Five-model equivalent circuit analysis
• Measured value search function
Contact check function (DCR measurement, Hi-Z reject)
Per form contact checks using DCR measurement on
components such as inductors, ferrite cores, and common mode
filters. The IM7585 can also perform contact checks using Hi-Z
reject functionality for components such as capacitors.
Both of these capabilities can be combined with a chatter
detection check to deliver highly reliable measurements.
Half-rack dimensions and intuitive operability enhances productivity
The compact design lets you stack two units side-by-side to
mount into a full-rack space so that you can use two Impedance
Analyzers simultaneously to further streamline testing and
increase production yield. Customize the brightness, color and
viewing size of the large color display in order to accommodate
the needs of your workspace, and use the convenient touch
screen to achieve maximum work efficiency.
The bundled test head is also compact and unobtrusive, letting
you set it as close to the device under test as possible in order
to minimize noise and other adverse effects that can impact
accuracy.
200mm
(7.87in)
64mm
(2.52in)
215mm
(8.46in)
90mm
(3.54in)
Basic Specifications
(Accuracy guaranteed for: 1 year. Post-adjustment accuracy guaranteed for: 1 year.)
Measurement
frequency
Frequency range : IM7583 1 MHz to 600 MHz
IM7585 1 MHz to 1.3 GHz
Measurement resolution : 100 kHz
Measurement
mode
LCR mode: Measurement using a single set of conditions
Analyzer mode: Sweep measurement and equivalent
circuit analysis
Continuous measurement mode: Continuous measurement using previously saved conditions
Measurement
parameters
Z, Y, θ, Rs, Rp, X, G, B, Cs, Cp, Ls, Lp, D, Q
LCR mode
Bin measurement: 10 categories for 4 measurement parameters
Comparater measurement: Hi, IN and Lo judgments for 4
parameters
Measurement range 100 mΩ to 5 kΩ
Analyzer mode
Basic accuracy
Frequency/level sweep measuremen (801 points)
Time interval measurement
Continuous measurement mode
LCR mode: 30 conditions, Analyzer mode: 16 conditions
Contact check
DCR measurement, HI-Z reject,
Waveform judgment (chatter detection)
Measurement level -40.0 dBm to +1.0 dBm (4 mV to 502 mV)
Measurement time As fast as 0.5 ms (Analog measurement time)
Z : ±0.65% rdg. θ : ±0.38° (representative value)
Power supply and
AC 100 V to 240 V (50 Hz / 60 Hz), 70VA
maximum rated power
Approx. 215W×200H×348D mm (8.46W×7.87H×13.7D in),
Dimensions and
Approx. 8.0 kg (282.3 oz)
weight
Accessories
Interfaces
Power cord ×1, Instruction manual ×1,
Impedance analyzer application disc ×1
USB, LAN, GP-IB (optional), RS-232C (optional)
*These interfaces support programming commands used with
the HIOKI Model 3535 LCR HiTester.
Handler, USB memory
Instrument
• IMPEDANCE ANALYZER IM7583-01 (Order code: IM7583-01)
Main unit composition: IM7583, Test Head, Connection cable (1m)
• IMPEDANCE ANALYZER IM7583-02 (Order code: IM7583-02)
Main unit composition: IM7583, Test Head, Connection cable (2m)
• IMPEDANCE ANALYZER IM7585-01 (Order code: IM7585-01)
Main unit composition: IM7585, Test Head, Connection cable (1m)
• IMPEDANCE ANALYZER IM7583-02 (Order code: IM7585-02)
Main unit composition: IM7585, Test Head, Connection cable (2m)
Test fixtures or probes are not included with the main unit.
A dedicated test fixture is required. For more information, please
contact your HIOKI distributor.
Options
Interfaces
*Any interlink-compatible cross-cable can be used as the RS-232C CABLE.
GP-IB INTERFACE Z3000
GP-IB CONNECTION CABLE 9151-02
Cable length: 2 m (6.56 ft)
RS-232C INTERFACE Z3001
RS-232C CABLE 9637
Cable length: 1.8 m (5.91ft)
Test fixtures and associated options: Available soon
• TEST FIXTURE STAND IM9200
• ADAPTER IM9906 (3.5 mm to 7 mm)
• SMD TEST FIXTURE IM9201
Note: Company names and Product names appearing in this catalog are trademarks or registered trademarks of various companies.
HIOKI (Shanghai) SALES & TRADING CO., LTD.
TEL +86-21-63910090 FAX +86-21-63910360
http://www.hioki.cn / E-mail: info@hioki.com.cn
РАДАР - ОФИЦИАЛЬНЫЙ ДИЛЕР HIOKI
HIOKI INDIA PRIVATE LIMITED
TEL +91-124-6590210 FAX +91-124-6460113
HEADQUARTERS
E-mail: hioki@hioki.in
81 Koizumi, Ueda, Nagano, 386-1192, Japan
TEL +81-268-28-0562 FAX +81-268-28-0568
HIOKI SINGAPORE PTE. LTD.
http://www.hioki.com / E-mail: os-com@hioki.co.jp TEL +65-6634-7677 FAX +65-6634-7477
E-mail: info-sg@hioki.com.sg
HIOKI USA CORPORATION
HIOKI KOREA CO., LTD.
TEL +1-609-409-9109 FAX +1-609-409-9108
TEL +82-2-2183-8847 FAX +82-2-2183-3360
http://www.hiokiusa.com / E-mail: hioki@hiokiusa.com E-mail: info-kr@hioki.co.jp
All information correct as of Aug. 18, 2015. All specifications are subject to change without notice.
РОССИЯ, 198152, Санкт-Петербург
Краснопутиловская ул., д.25
Тел./факс +7 (812) 600-48-89
Тел.: +7 (812) 375-32-44
www.radar1.ru
IM7585E1-58E
Printed in Japan
info@radar1.ru
HIOKI_IM7583_ENG.pdf (PDF, 1.86 MB)
Use the permanent link to the download page to share your document on Facebook, Twitter, LinkedIn, or directly with a contact by e-Mail, Messenger, Whatsapp, Line..
Use the short link to share your document on Twitter or by text message (SMS)
Copy the following HTML code to share your document on a Website or Blog