1 18 Bicycle M30 Wehrmacht kit LATE instructions HR .pdf
Original filename: 1-18 Bicycle M30 Wehrmacht kit LATE instructions HR.pdf
This PDF 1.5 document has been generated by / doPDF Ver 7.2 Build 355 (Windows XP Professional Edition (SP 3) - Version: 5.1.2600 (x86)), and has been sent on pdf-archive.com on 13/09/2016 at 13:19, from IP address 80.106.x.x.
The current document download page has been viewed 431 times.
File size: 4.4 MB (9 pages).
Privacy: public file
Download original PDF file
1-18 Bicycle M30 Wehrmacht kit LATE instructions HR.pdf (PDF, 4.4 MB)
Share on social networks
Link to this file download page
We thank you for buying our products and we appreciate your interest on
our 1/18 scale WWII Wehrmacht Fahrrade M30 reconnaissance duty bicycle
model kit, one of our most wanted 3d printed products in plastic material.
In case you ‘ll notice slight traces of oil on the kit parts surface when
you got the item, it is absolutely normal. This oil is actually left after the
3D printing process was finished and the kit parts been removed from the
printer tray to be washed into an ultrasonic oil bath and later an
ultrasonic water bath and might escaped the clean inspection and dry by
hand procedure. It can be cleaned easily by washing parts with water &
dishwasher soap. Use an old toothbrush gently & then allow to dry. Keep
in mind that items are only 0.3mm to 0.5mm thin and they are very fragile.
Feel free to ask any help or info during your model building process. You
allready got the assembling instructions in your hands, but we ‘d like you
to know that Anyuta 3D will be always next to you for anything you might
need in order to build a realistic scale model for your showcase.
Anyuta 3D print creations & scale models
Fahrrade M30 duty bicycle
1/18 scale 3d printed model kit by anyuta creations
The German Army bicycles (Wehrmacht Truppenfahrrades) were widely used
during WWII operations. Germans used more than 3 million military bicycles
during the War. Almost all WWII European Armies used identical bicycles.
STEP-BY-STEP MODEL KIT BUILDING INSTRUCTIONS
This is a German made Fahrrade M30 duty bicycle unassembled model kit
produced under 1/18 scale for aviation or military diorama enthousiasts &
scale modeler builders. This kit contains all necessary parts for
assembling ONE model under 1/18 scale. All parts are 3D printed with
Frosted Ultra Detail matte translucent plastic material, which is highly
recomended for best results on detail. Additional diorama accessories (eg.
Fuel drums & jerrycans, fire extinguisher, wheel chokes etc) are not
included into this model kit and should be purchased separately by
“Anyuta 3D print creations” products catalog. Please follow the step-bystep model kit building instructions. Due to parts complexity, the kit is
appropriate for experienced modelers. For additional info, building
instructions & directions, contact with us and we ‘ll be happy to help.
The bicycle scale model kit contains 5 parts only, 3D printed with Frosted Detail
matte translucent plastic material. Please check & identify each part closely before
proceeding to building process. Cyanoacrylate glue is recommended for best results.
Insert pin into slot as shown on above picture and attach front wheel on main frame.
The front wheel part can be instaled tilted. Use extra caution while installing part &
avoid violent moves to prevent plastic parts fracture. Secure in place with superglue
Insert pin into slot as shown on above picture and attach the steering bar on main
frame. Notice that if the front wheel part is placed tilted to left or right, the
steering bar should be also positioned accordingly. Use superglue to secure in place
Insert each pin properly into slot as shown on above picture and attach the petals
on bicycle’s main frame. Notice that petals can be set at any angle, but should be
positioned accordingly to face opposite. Use cyanoacrylate superglue & secure parts
This is how the built bicycle scale model should look like when all 5 parts correctly
installed. Use extra caution while installing each model part & avoid violent moves
to prevent plastic material fracture. Use of cyanoacrylate superglue is recommended
Additional 1/18 scale models & diorama scene accessories such as fuel canisters, oil
drums, wheel chokes, maintenance ladders, fire extinguishers, hydraulic hoists etc
(not included into this kit) are available for sale by “anyuta 3d printed scale models”
Link to this page
Use the permanent link to the download page to share your document on Facebook, Twitter, LinkedIn, or directly with a contact by e-Mail, Messenger, Whatsapp, Line..
Use the short link to share your document on Twitter or by text message (SMS)
Copy the following HTML code to share your document on a Website or Blog